Fuel Return Option

O&G · 10-01-2013, 12:00 AM

I decided to do a full fuel return system with my built block, 70mm turbo setup with the option to run a surge tank in the future. I haven’t seen much discussion on the topic so I thought I’d share what I’m doing. I originally had a single turbo setup on a stock block, stock fuel system with the CJ Motorsports Fuel Pump Kit and Walboro 255lph pump.

Parts:
• GTM Fuel Pressure Adapter Regulator Kit GTM Motorsports*::*FUEL SYSTEM*::*GTM FUEL PRESS ADPTER REGULATOR KIT
• AEM Adjustable Regulator GTM Motorsports*::*FUEL SYSTEM*::*AEM Universal Adjustable Fuel Pressure Regulator
• Aeromotive Stealth 340lph pump
• CJ Motorsports Fuel Pump Install Kit CJM Fuel Pump Install Kit
• GTM Fuel Pump Voltage Stabilizer Kit GTM Motorsports*::*FUEL SYSTEM*::*GTM FUEL PUMP VOLTAGE STABILIZER KIT
• CJ Motorsports fuel return adapter, this part will delete the stock regulator that sits inside the pump housing
• CJ Motor sports supplied all lines and fittings

I placed a custom order with Charles a/k/a Phunk from CJ Motorsports because I already had some of the parts required for the return system. I’ve been a customer for 8 years and couldn’t ask for a better company to deal with.

I chose to use the stock fuel rails as they are considerably bigger than the VQ35 series rails and should be able to handle the 600-650whp mark. I have Injector Dynamic 850cc injectors, but wishing I went with the 1000cc for an E85 option. I also chose to run an electronic fuel gauge into the cabin from the regulator. In the future if I decide to track the car I have the option of adding a surge tank to the system with larger pumps, etc….

If you’re doing any work on the VQ37VHR fuel system do yourself a favor and read the following:
http://blog.cj-motorsports.com/2009/...-assembly.aspx
It will give you background and instructions on installing basic to full return systems for our platform.

Setup:

Stock Fuel Regulator in Pump Housing:

CJ Motorsports Fuel Pressure Delete Adapter:
Requires “Great Care” trimming the pump housing, being careful not to cut/break into the housing.

CJ Motorsports Fuel Pump Kit & Regulator Delete Adapter:

GTM Fuel Pressure Adapter Regulator(EngineBay), sorry for bad pics:

AEM Regulator mounted with Fuel Gauge Sender Unit:

GTM Fuel Voltage Stabilizer Kit:

I had to fish the fuel return line down through a tight space, but other than that running the line was easy. I ran it with the stock fuel sending line using some P clamps.

I should know if this fuel setup is adequate for my power goals in a few weeks!

G37sHKS · 10-01-2013, 03:21 AM

CJM are known for their quality fuel system.

If my GTM return style fuel system was not enough for Garret GTX I'll definitely contact CJM and see what we can do to upgrade.

O&G · 10-01-2013, 10:33 AM

Some pics of the return line.

sent from my Samsung Galaxy Note

phunk · 10-01-2013, 01:36 PM

Quote:

Originally Posted by G37sHKS

CJM are known for their quality fuel system.

If my GTM return style fuel system was not enough for Garret GTX I'll definitely contact CJM and see what we can do to upgrade.

Wait until you see whats in the oven right now

Not to spam someone else's thread but we have made some changes to our 370z fuel system options and parts are currently being cut.

O&G · 10-01-2013, 01:53 PM

Quote:

Originally Posted by phunk

Wait until you see whats in the oven right now

Not to spam someone else's thread but we have made some changes to our 370z fuel system options and parts are currently being cut.

Nice, can't wait to see what you guys are up to. Spam away!

Chuck33079 · 10-01-2013, 01:55 PM

Quote:

Originally Posted by phunk

Wait until you see whats in the oven right now

Not to spam someone else's thread but we have made some changes to our 370z fuel system options and parts are currently being cut.

With all due respect, stop it. I don't need to add any more parts to the list right now. I still haven't installed all of the ones I've bought yet.

SPOHN · 10-01-2013, 08:40 PM

Great upgrade

10-01-2013, 12:00 AM	#1 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 23	Fuel Return Option I decided to do a full fuel return system with my built block, 70mm turbo setup with the option to run a surge tank in the future. I haven’t seen much discussion on the topic so I thought I’d share what I’m doing. I originally had a single turbo setup on a stock block, stock fuel system with the CJ Motorsports Fuel Pump Kit and Walboro 255lph pump. Parts: • GTM Fuel Pressure Adapter Regulator Kit GTM Motorsports::FUEL SYSTEM::GTM FUEL PRESS ADPTER REGULATOR KIT • AEM Adjustable Regulator GTM Motorsports::FUEL SYSTEM::AEM Universal Adjustable Fuel Pressure Regulator • Aeromotive Stealth 340lph pump • CJ Motorsports Fuel Pump Install Kit CJM Fuel Pump Install Kit • GTM Fuel Pump Voltage Stabilizer Kit GTM Motorsports::FUEL SYSTEM::GTM FUEL PUMP VOLTAGE STABILIZER KIT • CJ Motorsports fuel return adapter, this part will delete the stock regulator that sits inside the pump housing • CJ Motor sports supplied all lines and fittings I placed a custom order with Charles a/k/a Phunk from CJ Motorsports because I already had some of the parts required for the return system. I’ve been a customer for 8 years and couldn’t ask for a better company to deal with. I chose to use the stock fuel rails as they are considerably bigger than the VQ35 series rails and should be able to handle the 600-650whp mark. I have Injector Dynamic 850cc injectors, but wishing I went with the 1000cc for an E85 option. I also chose to run an electronic fuel gauge into the cabin from the regulator. In the future if I decide to track the car I have the option of adding a surge tank to the system with larger pumps, etc…. If you’re doing any work on the VQ37VHR fuel system do yourself a favor and read the following: http://blog.cj-motorsports.com/2009/...-assembly.aspx It will give you background and instructions on installing basic to full return systems for our platform. Setup: Stock Fuel Regulator in Pump Housing: CJ Motorsports Fuel Pressure Delete Adapter: Requires “Great Care” trimming the pump housing, being careful not to cut/break into the housing. CJ Motorsports Fuel Pump Kit & Regulator Delete Adapter: GTM Fuel Pressure Adapter Regulator(EngineBay), sorry for bad pics: AEM Regulator mounted with Fuel Gauge Sender Unit: GTM Fuel Voltage Stabilizer Kit: I had to fish the fuel return line down through a tight space, but other than that running the line was easy. I ran it with the stock fuel sending line using some P clamps. I should know if this fuel setup is adequate for my power goals in a few weeks! Boost_lee, phunk, GaleForce and 2 others like this. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal Last edited by O&G; 10-01-2013 at 02:13 PM.

10-01-2013, 03:21 AM	#2 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 21	CJM are known for their quality fuel system. If my GTM return style fuel system was not enough for Garret GTX I'll definitely contact CJM and see what we can do to upgrade. O&G likes this. __________________ G37 BUILD UNDER CONSTRUCTION

10-01-2013, 08:40 PM	#7 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	Great upgrade O&G likes this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[AAM Competition] -- Fuel Return System, Oil Cooler Kit, Oil Pan Spacers MADE IN USA!	Sales@AAMComp	Drivetrain/Engine	45	04-16-2013 10:38 PM
[FOR SALE] AAM Fuel Return System	Kim@Forged	Parts for sale (Private Classifieds)	13	04-11-2013 01:47 PM
Converting to return fuel system? (turbo)	overlord	Engine & Drivetrain	9	04-28-2012 02:12 PM
[FOR SALE] BNIB AAM Comp 370z Fuel Return System	Kim@Forged	Parts for sale (Private Classifieds)	16	04-25-2012 10:19 AM