|
You can try adjusting it yourself, it's probably the shifter guide plate that's installed wrong. You just need a 10mm socket and about 15 minutes. "If you remove the shifter
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
04-10-2019, 10:48 AM
|
#12 (permalink) |
|
Track Member
Join Date: Mar 2015
Location: Michigan
Posts: 552
Drives: 370Z Nismo
Rep Power: 9470   |
You can try adjusting it yourself, it's probably the shifter guide plate that's installed wrong. You just need a 10mm socket and about 15 minutes.
"If you remove the shifter boot assembly, you'll see the brass colored bracket with 3 bolts that secures the shifter. When you put the shifter in 6th gear, it should just touch the side of the bracket. If not, adjust it accordingly. Same for 5th gear; it should touch the bracket. "
__________________
Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Seat popping. | blackflag | 370Z Technical Service Bulletins (TSB) / Recalls | 6 | 08-23-2012 12:35 PM |
| Popping Sound Shifting Under Acceleration | christian370z | Engine & Drivetrain | 22 | 07-17-2012 02:38 PM |
| Clutch Popping sound | 370zFORme!! | Engine & Drivetrain | 14 | 03-09-2011 01:02 AM |
| Popping sound | OnCallZ | Nissan 370Z General Discussions | 4 | 06-11-2009 07:21 PM |
22Likes
Threaded Mode
