How much to install...

osbornsm · 08-27-2017, 07:34 AM

Zspeed CMAK, flywheel, clutch... On a mostly stock 370z.

Ghost116 · 08-27-2017, 08:24 AM

I'll be he first to lol. And keep my flame suit off it's to early. Check diy section, not sure if there's that exact part but I'm sure there's a drop the tranny, open it diy. Get a fsm will help if u get lost. And I thought the cmak came with some instructions?

Sent from my iPhone using Tapatalk

Chuck33079 · 08-27-2017, 08:34 AM

Figure 6-8 hours of labor at a decent shop.

osbornsm · 08-27-2017, 01:01 PM

Quote:

Originally Posted by Chuck33079

Figure 6-8 hours of labor at a decent shop.

Thanks Chuck, I just want to be sure in not getting screwed at a shop.

lj909 · 08-27-2017, 02:15 PM

The standard clutch fee plus 2-4 hours for the CMAK since the trans is already out. Should not be more then that. I installed my CMAK and it was very straight forward with instructions.

2011 Nismo#91 · 08-27-2017, 02:30 PM

Quote:

Originally Posted by Chuck33079

Figure 6-8 hours of labor at a decent shop.

Yep it's takes about that long.

Joe@ZSpeed · 08-29-2017, 08:40 AM

Quote:

Originally Posted by lj909

The standard clutch fee plus 2-4 hours for the CMAK since the trans is already out. Should not be more then that. I installed my CMAK and it was very straight forward with instructions.

Once the trans is dropped the CMAK should take no more than 30 minutes to install. It is 7 bolts inside and 2 bolts outside.

lj909 · 08-29-2017, 09:23 AM

Quote:

Originally Posted by Joe@ZSpeed

Once the trans is dropped the CMAK should take no more than 30 minutes to install. It is 7 bolts inside and 2 bolts outside.

I agree now that i have done it. But for a first timer, it takes a little longer.

Quicksilvers · 08-31-2017, 05:36 AM

I was quoted 7-8 hours labor on this job and was told it is harder than it looks and is quite detailed.

lj909 · 08-31-2017, 01:17 PM

Quote:

Originally Posted by Quicksilvers

I was quoted 7-8 hours labor on this job and was told it is harder than it looks and is quite detailed.

Well they're trying to get money out of you cuz it's not. I'm just a driveway hobby mechanic and it was very straight forward with good instructions. For the CMAK anyways. Doing the whole clutch as well will take time

Jayhovah · 08-31-2017, 01:22 PM

Quote:

Originally Posted by lj909

Well they're trying to get money out of you cuz it's not. I'm just a driveway hobby mechanic and it was very straight forward with good instructions. For the CMAK anyways. Doing the whole clutch as well will take time

I'm assuming he meant for the whole job, not just CMAK assuming the trans is already out.

Chucks estimate of 6-8 is accurate by my experience.

08-27-2017, 07:34 AM	#1 (permalink)
osbornsm A True Z Fanatic Join Date: Jun 2011 Location: WHAT Posts: 2,551 Drives: 2018 Camaro SS 1LE Rep Power: 423	How much to install... Zspeed CMAK, flywheel, clutch... On a mostly stock 370z. __________________ 2018 Camaro SS 1LE (455hp) - 2011 Nissan 370z (333hp) - 2004 VW R32 (240hp) - 2000 Civic Si (160hp)

08-27-2017, 08:34 AM	#3 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	Figure 6-8 hours of labor at a decent shop. 2011 Nismo#91 likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

08-27-2017, 02:15 PM	#5 (permalink)
lj909 Track Member Join Date: May 2014 Location: Riverside Posts: 584 Drives: 40th 370Z Rep Power: 12	The standard clutch fee plus 2-4 hours for the CMAK since the trans is already out. Should not be more then that. I installed my CMAK and it was very straight forward with instructions. __________________ PW 07 HR350Z R.I.P. Totaled by 82yr old woman 2010 40th Anniversary 370Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A R T install	tommyguns	Intake/Exhaust	0	06-06-2015 09:38 PM
AEM ETI CAI install	Nismo z34	Nismo 370Z	2	03-14-2012 11:10 PM
HID install went bad :/	370zmarc	Exterior & Interior	0	03-07-2012 01:38 AM
CBE install first, then HFC, or together?	TruKoi	Intake/Exhaust	2	06-15-2011 10:49 PM
Help with My Install	LinPark	Audio & Video	15	08-08-2010 08:28 AM

08-27-2017, 08:24 AM	#2 (permalink)
Ghost116 Base Member Join Date: Aug 2015 Location: Ontario Posts: 167 Drives: Up coming Rep Power: 366	I'll be he first to lol. And keep my flame suit off it's to early. Check diy section, not sure if there's that exact part but I'm sure there's a drop the tranny, open it diy. Get a fsm will help if u get lost. And I thought the cmak came with some instructions? Sent from my iPhone using Tapatalk

08-31-2017, 05:36 AM	#9 (permalink)
Quicksilvers A True Z Fanatic Join Date: May 2017 Location: Atlanta, GA Posts: 2,039 Drives: 2017 370z Rep Power: 25462	I was quoted 7-8 hours labor on this job and was told it is harder than it looks and is quite detailed.