![]() |
Originally Posted by jrb55gh Does running large concentrations of ethanol in fuel cause the stock fuel pump hat to fail sooner? I currently have no reason to believe that the
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
![]() |
#16 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,655
Drives: 370
Rep Power: 944523 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
I currently have no reason to believe that the material is compromised by ethanol. I ran mine in nothing but E85 for over 3 years since last inspection and the OEM plastic showed no degradation of that type. It just had the "lean" going showing that it had deformed the same as any higher mileage ones I have seen.
|
![]() |
![]() |
![]() |
#17 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,655
Drives: 370
Rep Power: 944523 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Several customers have been ordering their new top hat with a new fuel system simultaneously.
I snapped a photo the other day while packing up the in-tank portion of a fuel system, top hat, fuel pump combo that was ordered. These new fuel systems are setup to harness the full potential of the pump. The fuel pump output heads directly out of the hat via an OEM quality convoluted PTFE hose, bypassing the post-pump filter and regulator housing, and out the hat via our custom bulkhead fitting. We put a large Aeromotive filter under the car and new PTFE lined feed lines up to the engine. Doing so, now even our entry level return systems have 100% upgraded high flow feed, without a single inch of the factory plumbing being retained for the feed side. The return fuel is coming back through the original factory feed pipe, which is why you see our custom QD adapter for the return bulkhead on this top hat. From there, return fuel flows through a 3/8" softline to the CJM regulator delete fittings, to keep the factory venturi system on-line. This Aeromotive pump will be getting all the juice it needs through our large-terminal fuel-rated connector system. ![]() |
![]() |
![]() |
![]() |
#18 (permalink) |
Enthusiast Member
Join Date: Apr 2012
Location: Puerto Rico
Posts: 380
Drives: 09 Nissan 370z CY M6
Rep Power: 13 ![]() ![]() ![]() |
![]()
Always great stuff Charles. I have been running your Stage 1 return fuel system for nearly 2 years and i am very interested in this piece but i wanted to ask what else i could upgrade to my Stage 1 since usually on your page you sell almost everything in packages and there are pieces that i would not need. Would the L2 Fuel Pump and Return Mod be a good addition? Which seems like it is the combination on the photo above. Thanks!
|
![]() |
![]() |
![]() |
#19 (permalink) | |
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,655
Drives: 370
Rep Power: 944523 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
Our L2 level of fuel pump modifications involves bypassing the internal fuel filter and using a larger output and then the stock feed re-purposed as the return. So if you wanted to move up to that, we would need to also package you an upgrade kit to take you all the way to the new S1.E fuel system with external filter. If you chose to do this, between what you already have, and the billet hat with L2 install kit, you would not need to actually purchase the standalone L2 fuel pump modification kit. To complete the conversion would mean adding our external filter kit, and the 2 new feed hoses (from fuel pump to filter, and filter to engine). |
|
![]() |
![]() |
![]() |
#20 (permalink) | |
Enthusiast Member
Join Date: Apr 2012
Location: Puerto Rico
Posts: 380
Drives: 09 Nissan 370z CY M6
Rep Power: 13 ![]() ![]() ![]() |
![]() Quote:
|
|
![]() |
![]() |
![]() |
#21 (permalink) | |
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,655
Drives: 370
Rep Power: 944523 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
I will PM you an itemized list/quote of what you need to get all current and upgraded! |
|
![]() |
![]() |
![]() |
#22 (permalink) | |
A True Z Fanatic
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#23 (permalink) | |
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,655
Drives: 370
Rep Power: 944523 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
PM sent also. Thanks! |
|
![]() |
![]() |
![]() |
#24 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,655
Drives: 370
Rep Power: 944523 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
My latest fuel pump tech PDF includes notes on how to assembly the billet top hat: http://host.cj-motorsports.com/pdf/3...ump%20Tech.pdf
|
![]() |
![]() |
![]() |
#25 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,655
Drives: 370
Rep Power: 944523 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
5 left in stock right now. Material for 50 more came in last week... it might be a few weeks more before I am able to cut them, but I am going to try to get them in ASAP.
Check out the before and after pics I got from a customer today who had to repair his module. He was running a totally stock fuel system and stock pump, so he used the "stock type" installation kit of course. ![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#26 (permalink) | |
Enthusiast Member
Join Date: Dec 2014
Location: Nashville
Posts: 301
Drives: Nissan 370Z Sport
Rep Power: 10 ![]() |
![]() Quote:
Still have any in stock ??
__________________
Stillen G3, z1 Intake Manifold, Stillen Headers, Z1 HFC's, Stillen Catback. 330whp 267 ft- lbs tuned at Z1 motorsports. |
|
![]() |
![]() |
![]() |
#30 (permalink) |
Enthusiast Member
Join Date: Feb 2011
Location: ontario
Posts: 369
Drives: 09 370z touring
Rep Power: 14 ![]() |
![]()
Hi phunk, any black Friday deals? I have your fuel pump kit and mini pressure gauge already,i need a fuel return kit and would like the new pump hat also, let me know what I need with the hat,i have a stage 2'sc kit,iam going to 12lbs of boost for next summer and running 109 unleaded ,I am in Canada so exchange sucks right now,let me know what you can do,thanks
|
![]() |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEW PRODUCT: AAM Competition 370Z Twin Pump Fuel System!!! | michaeld@aamc | Drivetrain/Engine | 87 | 01-20-2017 03:44 PM |
NEW PRODUCT: AAM Competition 370Z Twin Pump Fuel System!!! | michaeld@aamc | Forced Induction | 41 | 06-16-2016 02:07 PM |
Possible inexpensive fuel starve fix (no more $1200 fuel pump system!) | Nismodean | Nissan 370Z General Discussions | 2 | 02-18-2016 12:32 PM |
[FOR SALE] CJMotorsports 370z fuel starvation elimination kit, fuel pump brand new | cossie1600 | Parts for sale (Private Classifieds) | 3 | 12-10-2015 09:43 PM |
[FOR SALE] Walbro 255 Lph Fuel Pump (PUMP ONLY) | Nism0 | Parts for sale (Private Classifieds) | 8 | 08-18-2013 03:23 PM |