Crank Pulley Replacement

BlackZMamba · 04-22-2016, 04:24 PM

Quote:

Originally Posted by FLUJOKE

NST is still around and they're out of Houston. They're pulleys are very light and solid so far with me. If you're going boosted go with ATI like people said but otherwise you should be ok. I went NST over stillen bc they offer and OD Alternator pulley as well. I went w/ NST over ATI bc of costs and not boosted. I feel a huge amount of stress lifted off the engine and it should be everyone's 1st mod.

Sent from my iPhone using Tapatalk

Thanks. Great input.

onzedge · 04-22-2016, 07:55 PM

Quote:

Originally Posted by LAVA

10 HP and 9 ft/lbs of Torque

onzedge · 04-22-2016, 07:59 PM

I run the Stillen with no issues. I have a bit better throttle response.

My son loves working on my Z's...

onzedge · 04-22-2016, 07:59 PM

onzedge · 04-22-2016, 08:00 PM

onzedge · 04-22-2016, 08:00 PM

Rusty · 04-22-2016, 11:24 PM

Quote:

Originally Posted by Spooler

ATI damper and be done with it.

Quote:

Originally Posted by AntiVenom

That's the route I went. Rather have reliability than an extra 1whp.

onzedge · 10-11-2016, 12:59 PM

Quote:

Originally Posted by Rusty

Rusty · 10-11-2016, 01:25 PM

Quote:

Originally Posted by onzedge

Hotrodz · 10-11-2016, 01:32 PM

Sent from my SM-N910P using Tapatalk

Rusty · 10-11-2016, 06:39 PM

Quote:

Originally Posted by Rusty

Quote:

Originally Posted by onzedge

Quote:

Originally Posted by Rusty

Quote:

Originally Posted by Hotrodz

Sent from my SM-N910P using Tapatalk

onzedge · 10-11-2016, 06:46 PM

Quote:

Originally Posted by Rusty

Hotrodz · 10-11-2016, 10:50 PM

Rusty · 10-12-2016, 10:54 AM

Quote:

Originally Posted by Hotrodz

JARblue · 10-12-2016, 11:25 AM

Quote:

Originally Posted by Rusty

Quote:

Originally Posted by onzedge

Quote:

Originally Posted by Rusty

Quote:

Originally Posted by Hotrodz

Quote:

Originally Posted by Rusty

Quote:

Originally Posted by Hotrodz

Quote:

Originally Posted by Rusty

Yes, ATI damper

04-22-2016, 07:59 PM	#18 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 65 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684738	I run the Stillen with no issues. I have a bit better throttle response. My son loves working on my Z's... Rusty likes this. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

04-22-2016, 07:59 PM	#19 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 65 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684738	Rusty likes this. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

04-22-2016, 08:00 PM	#20 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 65 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684738	Rusty likes this. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

04-22-2016, 08:00 PM	#21 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 65 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684738	Rusty likes this. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

10-11-2016, 01:32 PM	#25 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684386	Sent from my SM-N910P using Tapatalk JARblue and Rusty like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

10-11-2016, 10:50 PM	#28 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684386	onzedge, JARblue and Rusty like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] OEM Crank Pulley & Belt	dudesky	Parts for sale (Private Classifieds)	0	05-09-2015 05:32 PM
Best crank pulley?	Joker_J	Engine & Drivetrain	8	01-16-2015 01:42 AM
[FOR SALE] Stillen U.D. Crank pulley	Elmo370z	Parts for sale (Private Classifieds)	49	01-03-2015 07:04 PM
[WTB] OEM Crank Pulley	JCA92	Parts for sale (Private Classifieds)	7	04-11-2014 05:16 PM
[FOR SALE] OEM Crank Pulley	ALV233	Parts for sale (Private Classifieds)	5	10-02-2013 09:15 PM