Question on oil cooler install.

ZeroZeta · 02-17-2016, 03:10 PM

Hi gang.

I was wondering if anyone knew whether or not it would be possible to install an oil cooler without taking the front bumper off and just doing the install from the bottom of the car when you remove the undertray.

Thanks - ZZ

TerribleONE · 02-17-2016, 03:11 PM

Quote:

Originally Posted by ZeroZeta

Hi gang.

I was wondering if anyone knew whether or not it would be possible to install an oil cooler without taking the front bumper off and just doing the install from the bottom of the car when you remove the undertray.

Thanks - ZZ

I doubt it (cant say forsure)

Buy can I ask why?? the bumper is extremely easy to get off.

ZeroZeta · 02-17-2016, 03:54 PM

Hey TerribleOne - So I am running an aftermarket bumper and the fitment is perfect.

As a result I am a little hesitant to treat it like I did my OEM as I am concerned that if I keep taking it on and off I will gradually end up with it not fitting as well as it currently does.

So my preference is to not mess with it if I can get around it. I was able to install an Injen CAI without taking it off so it also made me realize I should consider all options for installs.

I have easier access to a lift than I used to and also makes it less of a hassle to get under the car.

JARblue · 02-17-2016, 04:07 PM

Quote:

Originally Posted by ZeroZeta

I was able to install an Injen CAI without taking it off so it also made me realize I should consider all options for installs.

Are you able to access and remove the CAI filters for cleaning without removing the bumper?

Elmo370z · 02-17-2016, 09:34 PM

Quote:

Originally Posted by JARblue

Are you able to access and remove the CAI filters for cleaning without removing the bumper?

That seem a bit impossible to me, If he had g3's how would you get to the band to loosen up the filter?

JARblue · 02-17-2016, 09:53 PM

Quote:

Originally Posted by Elmo370z

That seem a bit impossible to me, If he had g3's how would you get to the band to loosen up the filter?

That's exactly why I asked

ZeroZeta · 02-18-2016, 08:34 AM

Hey Jar. Yes I can access the filters. Keep in mind the position of the Injen filters is the same as the AEM ones.

So all you have to do is remove the wheels and peel back the fender liner. Also accessible via removing the under tray.

Obviously not possible if I had Stillen G3s or comparable CAI.

JARblue · 02-18-2016, 08:43 AM

Right on

Still not sure how feasible it will be to install an oil cooler without removing the front bumper. Good luck!!

falconfixer · 02-18-2016, 08:48 AM

Bumper has to come off

Chuy · 02-18-2016, 09:46 AM

It would be difficult when you actually mount the cooler

FPenvy · 02-18-2016, 09:53 AM

i've taken off my bumper a bunch of times for oil changes/filter change/installs and it goes right back on with the same fitment it had prior.

i think you'll be fine unless you're that anal that a 1/2 a MM differnece in bumper to fender gap sets you off.

just take it off and do the work you'll be ok lol

Rusty · 02-18-2016, 12:21 PM

OP, what size oil cooler you installing? If you're installing a 34 row cooler. Think you would be better off removing the bumper to do it right.

ZeroZeta · 02-19-2016, 04:11 PM

Hey Rusty. I am looking at the Z1 25 row right now.

I have reviewed the instructions and thought it might be possible to mount it from underneath the problem is drilling holes for the bracket.

Was also looking at the AAM R-Line but makes me wonder how effect that would be compared to the traditional air cooled. The only benefit to me is added flexibility in installation location.

AAM Competition - Nissan GT-R, 370Z Turbo Performance Specialists

For anyone that is interested - Pic of AEM and Injen filter location included.

G3 wasn't an option for me because I have Arising II front and apparently the "nostrils" might push back on the G3 filter location.

YzGyz · 02-19-2016, 05:19 PM

Not trying to be an poop head but your making this super complected for nothing. Take bumper off. Put cooler on, put bumper back on. Done.

YzGyz

Rusty · 02-19-2016, 05:20 PM

AAM Competition - Nissan GT-R, 370Z Turbo Performance Specialists

$849.00, for that. No! Since you're in Texas. I would go with a 34 row and call it a day. What I would do is wait until I need to do a bunch of maintenance. Pull the front bumper. Do what I needed to do, and install the cooler at that time.

02-17-2016, 03:10 PM	#1 (permalink)
ZeroZeta Track Member Join Date: Aug 2013 Location: Austin TX Posts: 543 Drives: 2013 Z Rep Power: 12	Question on oil cooler install. Hi gang. I was wondering if anyone knew whether or not it would be possible to install an oil cooler without taking the front bumper off and just doing the install from the bottom of the car when you remove the undertray. Thanks - ZZ

02-18-2016, 08:34 AM	#7 (permalink)
ZeroZeta Track Member Join Date: Aug 2013 Location: Austin TX Posts: 543 Drives: 2013 Z Rep Power: 12	Hey Jar. Yes I can access the filters. Keep in mind the position of the Injen filters is the same as the AEM ones. So all you have to do is remove the wheels and peel back the fender liner. Also accessible via removing the under tray. Obviously not possible if I had Stillen G3s or comparable CAI. JARblue likes this.

02-18-2016, 08:43 AM	#8 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Right on Still not sure how feasible it will be to install an oil cooler without removing the front bumper. Good luck!! __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-18-2016, 08:48 AM	#9 (permalink)
falconfixer Track Member Join Date: Feb 2012 Location: 10aC Posts: 978 Drives: Taco Rep Power: 76	Bumper has to come off __________________ Bitch ex wife's scumbag lawyer made sure this went away.

02-18-2016, 09:46 AM	#10 (permalink)
Chuy Enthusiast Member Join Date: Apr 2010 Location: Colorado Springs Posts: 474 Drives: 2015 NISMO Rep Power: 15	It would be difficult when you actually mount the cooler __________________ Miko 2015 Nismo Tech: nothing RIP Ginger 2009 370Z Sport Touring

02-17-2016, 03:54 PM	#3 (permalink)
ZeroZeta Track Member Join Date: Aug 2013 Location: Austin TX Posts: 543 Drives: 2013 Z Rep Power: 12	Hey TerribleOne - So I am running an aftermarket bumper and the fitment is perfect. As a result I am a little hesitant to treat it like I did my OEM as I am concerned that if I keep taking it on and off I will gradually end up with it not fitting as well as it currently does. So my preference is to not mess with it if I can get around it. I was able to install an Injen CAI without taking it off so it also made me realize I should consider all options for installs. I have easier access to a lift than I used to and also makes it less of a hassle to get under the car.

02-18-2016, 12:21 PM	#12 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,881 Drives: 2011 Nismo GM 6M Rep Power: 2684436	OP, what size oil cooler you installing? If you're installing a 34 row cooler. Think you would be better off removing the bumper to do it right. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

02-19-2016, 05:19 PM	#14 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 62	Not trying to be an poop head but your making this super complected for nothing. Take bumper off. Put cooler on, put bumper back on. Done. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

02-19-2016, 05:20 PM	#15 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,881 Drives: 2011 Nismo GM 6M Rep Power: 2684436	AAM Competition - Nissan GT-R, 370Z Turbo Performance Specialists $849.00, for that. No! Since you're in Texas. I would go with a 34 row and call it a day. What I would do is wait until I need to do a bunch of maintenance. Pull the front bumper. Do what I needed to do, and install the cooler at that time. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Oil Cooler Install	jkim23	Southern California Region	6	04-23-2013 05:27 AM
Oil Cooler Install	Zedx	South East Region	0	05-14-2011 01:19 PM
Oil Cooler Install Observation and Question	VABAM	Engine & Drivetrain	6	02-28-2011 10:47 PM
install oil cooler?	Mt Tam I am	Nissan 370Z General Discussions	5	08-25-2010 09:08 AM