Oil Cooler Questions..

Z Runner

Thanks all

Is filter relocation make any difference or its unnecessary? Where to buy parts?

Im thinking on buying 24 row oil cooler from Z1. (Is it quality product?)
How much extra oil do I need to add with the cooler?

Rusty

Where you're at. I would go with a 34 row. I have the Z1 34 row. FI makes a good 34 row too. Figure about 3/4 quart the first time. Fill the cooler with oil, install the hoses. Then mount the cooler the the radiator support. Being careful not to tilt the cooler. This way, you won't have too much air in the system when you first start.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Z Runner

Ok,
I'm from Puerto Rico. Normal daily use I get 220 degrees
I'm planing on doing stilen SC in the near future

Elmo370z

Did you have any problems with the mounting bracket location. My holes didn't line up. I tried every hole on the bracket, but my left side where the head screws go in had no room for one bolt

Rusty

Page 2 of my journal has some pictures. Think my holes lined up. But had to cut the sheet metal plate above the oil cooler for the oil lines. And relocate the horn. Also had to use a spacer behind the mounts for the Nismo frame dampener, and flip it around to fit.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Elmo370z

Its secure i tried moving and it won't move. I have an 09 non nismo, the upper mounting bracket and the two head bolts are steady enough, if anything comes loose i'll get a new bracket fab'd up.