Jim Wolf Cam testing for the VQ37VHR -- Results inside!

Elmo370z · 02-07-2017, 03:34 PM

Quote:

Originally Posted by Z eliminator

I will be running my 4.5 stroker N/A with full bolt on's
the Block is at Darton now being sleeved now.
The heads are done and my Jun cams should be installed in them, stage 3 GTM
Stillen headers, test pipes, stillen intake, stillen exhaust, 4.08 gears with a stage 4 GTM 7 AT.
11.1 comp, 3200 rpm stall torque converter
will dyno with the M370 intake and the factory intake as well.

Its taken a long time it should make around 385 to 390 RWHP N/A, the 3.7 with the same mod's less heads makes 304 to 309 rwhp. base line was 264
I have the GTM stage 2 SC going on after the 1/4 mile runs.
it should run 11.87 N/A, 10.92 with the SC
it should be on the road late summer
Its not being built by Gamma, but by the company who designed the stroker for GTM.

Z

I can't wait to see the build. You dont think you will break 400whp?

SS_Firehawk · 02-07-2017, 12:36 PM

Have to admire Zeliminator's persistence. He gets trolled and keeps going; albeit slooooowly.

Z eliminator · 02-07-2017, 03:44 PM

Its been 3 years that GTM had the motor.
And Gamma promised that they would take car of it (hung me out to dry ) they did nothing.
Great customer service !!!!!!!!!!!!!
the shop who is doing the work are great people, they are very busy and are doing me a great favor by helping me, or I would be out 26000.00 US dollars.
I will post dynos
The Dyno that I use is a dyno jet. its a heart breaker, it reads low and I post my #s in SAE.
I estimate that my 3.7 made around 340 RWHP to run 12.32 and to trap at 114.14
according to the drag racing calculators
the 4.5 should make round 410 to 420 according to Sam at GTM

any way lets get back to the Wolf Cams

I can not wait to see how they work.

Z

James10694 · 02-07-2017, 10:32 PM

The heartache and misfortune eliminator had to go thru must've been unbearable. Good luck to you man. You are the only Z I know of running a cammed built engine NA.

Hopefully these new stage 2 cams unlock some more power when they come out

brucelidat · 02-22-2017, 11:42 PM

Did we ever get a dyno of a before and after where the before had all the common mods most of us already have??

brucelidat · 04-13-2017, 07:53 PM

Has anyone installed these on a TT'ed Z yet?

Spooler · 04-13-2017, 08:10 PM

Quote:

Originally Posted by brucelidat

Has anyone installed these on a TT'ed Z yet?

Yes, someone has. The work was done at MA Motorsports. FI TT kit. User name started with a K. Hang on, I will find the thread.

My 09 NISMO Fast Intentions TT Build

ChrisPerrera · 06-20-2017, 08:49 AM

Hey, MAMotorsports. How are those cams coming along?

PongSanity · 06-20-2017, 10:58 AM

Time to get back active on this thread....

SurfDog · 06-20-2017, 11:09 AM

I'm doing a full bolt on build with throttle bodies z1 400 kit and now am putting on the JWT exhaust cams. I'll post comparisons from my previous dyno once I'm all built up again.

Changes are big bore throttle bodies and cams.

Elmo370z · 06-20-2017, 04:23 PM

Stage 2 cam are in testing now

Alchemy · 06-25-2017, 07:00 AM

Quote:

Originally Posted by Elmo370z

Stage 2 cam are in testing now

Really? Geez, may have to push my engine build back....

SurfDog · 06-22-2017, 01:01 PM

I am rebuilding now or I might wait to see about stage 2cams.

(I'm n/a and building for reliability so maybe I'm better off on stage 1 anyhow??)

CJBinder · 06-22-2017, 10:18 PM

Is it only suggested if your doing engine work? Must cost a fortune to remove engine and put back in

Sent from my iPhone using Tapatalk

Elmo370z · 06-25-2017, 09:01 AM

Yerp, just patiently waiting now. I talk to D at Zdays about it. Already installed in a Z.

02-07-2017, 12:36 PM	#2 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Have to admire Zeliminator's persistence. He gets trolled and keeps going; albeit slooooowly. Spartan 1771, jaytirbhaw, Rusty and 3 others like this. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

02-07-2017, 03:44 PM	#3 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	Its been 3 years that GTM had the motor. And Gamma promised that they would take car of it (hung me out to dry ) they did nothing. Great customer service !!!!!!!!!!!!! the shop who is doing the work are great people, they are very busy and are doing me a great favor by helping me, or I would be out 26000.00 US dollars. I will post dynos The Dyno that I use is a dyno jet. its a heart breaker, it reads low and I post my #s in SAE. I estimate that my 3.7 made around 340 RWHP to run 12.32 and to trap at 114.14 according to the drag racing calculators the 4.5 should make round 410 to 420 according to Sam at GTM any way lets get back to the Wolf Cams I can not wait to see how they work. Z James10694 likes this. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015. Last edited by Z eliminator; 02-07-2017 at 03:49 PM.

02-07-2017, 10:32 PM	#4 (permalink)
James10694 Track Member Join Date: Oct 2013 Location: Las Vegas NV Posts: 918 Drives: 2010 370z Nismo Rep Power: 13	The heartache and misfortune eliminator had to go thru must've been unbearable. Good luck to you man. You are the only Z I know of running a cammed built engine NA. Hopefully these new stage 2 cams unlock some more power when they come out __________________ Boosted Performance Single Turbo 618whp/489 tq

02-22-2017, 11:42 PM	#5 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 32	Did we ever get a dyno of a before and after where the before had all the common mods most of us already have?? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

04-13-2017, 07:53 PM	#6 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 32	Has anyone installed these on a TT'ed Z yet? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

06-20-2017, 08:49 AM	#8 (permalink)
ChrisPerrera Base Member Join Date: Apr 2017 Location: Maryland Posts: 6 Drives: 10' G37s White 7AT Rep Power: 9	Hey, MAMotorsports. How are those cams coming along? MAMotorsports likes this.

06-20-2017, 10:58 AM	#9 (permalink)
PongSanity Enthusiast Member Join Date: Jul 2014 Location: Virgin Islands Posts: 261 Drives: '09 G37s KH3 6MT Rep Power: 11	Time to get back active on this thread....

06-20-2017, 11:09 AM	#10 (permalink)
SurfDog A True Z Fanatic Join Date: May 2012 Location: Colorado (9000 feet) Age: 57 Posts: 1,796 Drives: 09 6mt, 13 Sequoia, Rep Power: 15750	I'm doing a full bolt on build with throttle bodies z1 400 kit and now am putting on the JWT exhaust cams. I'll post comparisons from my previous dyno once I'm all built up again. Changes are big bore throttle bodies and cams. brucelidat, Rusty, James10694 and 3 others like this. __________________ 09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

06-20-2017, 04:23 PM	#11 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,725 Drives: 09 nissan 370z Sp M6 Rep Power: 295379	Stage 2 cam are in testing now gbrettin, brucelidat, SurfDog and 3 others like this.

06-22-2017, 01:01 PM	#13 (permalink)
SurfDog A True Z Fanatic Join Date: May 2012 Location: Colorado (9000 feet) Age: 57 Posts: 1,796 Drives: 09 6mt, 13 Sequoia, Rep Power: 15750	I am rebuilding now or I might wait to see about stage 2cams. (I'm n/a and building for reliability so maybe I'm better off on stage 1 anyhow??) __________________ 09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

06-22-2017, 10:18 PM	#14 (permalink)
CJBinder Enthusiast Member Join Date: May 2010 Location: Omaha NE Posts: 272 Drives: 09 370Z PG M6 Rep Power: 26	Is it only suggested if your doing engine work? Must cost a fortune to remove engine and put back in Sent from my iPhone using Tapatalk __________________ Injen cold air intakes, Ported upper and lower manifolds, OS Giken LSD, F1 Long Tube Headers, Magnaflow CBE. Natural Baby

06-25-2017, 09:01 AM	#15 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,725 Drives: 09 nissan 370z Sp M6 Rep Power: 295379	Yerp, just patiently waiting now. I talk to D at Zdays about it. Already installed in a Z. James10694 and MAMotorsports like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM Denso VQ37VHR Fuel injector Flow Test results	MILENKOGT	Engine & Drivetrain	13	08-30-2015 04:52 PM
GTM Stage 2 Supercharger Preliminary Testing Results	SAM@GTM	Forced Induction	576	01-15-2014 09:40 PM
Uprev Tuned at Z1, results inside :)	'10Anamoly	Tuning	12	01-01-2012 12:32 PM
1/4 mile results inside	ZforMe	Track / Autocross / Drifting / Dragstrip	32	04-24-2009 07:27 AM
Knock on the VQ37VHR - gear heads step inside	BerkTech	Intake/Exhaust	39	04-13-2009 10:37 AM