Oil Pressure Gauge Adapter (BSP & NPT)

JARblue · 06-10-2015, 03:05 PM

osbornsm · 06-22-2015, 09:01 AM

Here be some results.

...and yes it dims with the gauge cluster.

Rusty · 06-22-2015, 07:05 PM

Where did you get the adapter at?

osbornsm · 07-15-2015, 02:16 PM

The only place i found one available is here:

Oil Pressure Sensor Adapter, 1/8" BSPT - Engine - Autotech Motoring

Don't forget it has 2 x 1/8 npt holes, so you'll have to plug one of them.

~ Sean

40 to 332 · 07-15-2015, 05:13 PM

Quote:

Originally Posted by Rusty

Where did you get the adapter at?

I have a spare AutoTech adapter (complete with plug) if you're still looking for one. $25 (including shipping) and it's your. Post me if interested.

40 to 332 · 07-15-2015, 05:09 PM

Quote:

Originally Posted by osbornsm

Here be some results.

...and yes it dims with the gauge cluster.

Just about to install an AEM oil pressure gauge. According to the install instructions, it appears the wiring from the gauge to the power supply is similar to the Defi gauge set-up. Based on a quick look, I've located circuits in the interior fuse box located on the driver's side wheel well for the switched and unswitched power that's needed (which I can link into using add-a-circuits). What I need to know is what wire can I tap into so that the gauge dims with the gauge cluster as yours does. Appreciate any help you can provide. Thanks!

osbornsm · 07-16-2015, 08:20 AM

Quote:

Originally Posted by 40 to 332

What I need to know is what wire can I tap into so that the gauge dims with the gauge cluster as yours does. Appreciate any help you can provide. Thanks!

I was only able to find a dimmer wire as part of the radio harness wiring. Luckily, one of the radio wires was tagged with "ILLUM" and i spliced into that one.

40 to 332 · 07-16-2015, 09:36 AM

Quote:

Originally Posted by osbornsm

I was only able to find a dimmer wire as part of the radio harness wiring. Luckily, one of the radio wires was tagged with "ILLUM" and i spliced into that one.

Well, that was convenient. I'll check the wiring diagrams in the full service manual and find one to tap into. Thanks for the reply!

06-10-2015, 03:05 PM	#1 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 45 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684442	__________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

06-22-2015, 09:01 AM	#2 (permalink)
osbornsm A True Z Fanatic Join Date: Jun 2011 Location: WHAT Posts: 2,551 Drives: 2018 Camaro SS 1LE Rep Power: 426	Here be some results. ...and yes it dims with the gauge cluster. DIGItonium, AnthonyD1978, Rusty and 2 others like this. __________________ 2018 Camaro SS 1LE (455hp) - 2011 Nissan 370z (333hp) - 2004 VW R32 (240hp) - 2000 Civic Si (160hp)

06-22-2015, 07:05 PM	#3 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,585 Drives: 2011 Nismo GM 6M Rep Power: 2684440	Where did you get the adapter at? ZoomZ likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

07-15-2015, 02:16 PM	#4 (permalink)
osbornsm A True Z Fanatic Join Date: Jun 2011 Location: WHAT Posts: 2,551 Drives: 2018 Camaro SS 1LE Rep Power: 426	The only place i found one available is here: Oil Pressure Sensor Adapter, 1/8" BSPT - Engine - Autotech Motoring Don't forget it has 2 x 1/8 npt holes, so you'll have to plug one of them. ~ Sean David Parra and Rusty like this. __________________ 2018 Camaro SS 1LE (455hp) - 2011 Nissan 370z (333hp) - 2004 VW R32 (240hp) - 2000 Civic Si (160hp)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Oil Pressure Gauge	spearfish25	DIY Section (Do-It-Yourself)	141	11-12-2024 06:07 PM
Oil Pressure Adapter - Which One	osbornsm	Engine & Drivetrain	12	03-21-2016 01:43 AM
oil Pressure Gauge	Hi-Step'n370Z	Exterior & Interior	7	11-16-2010 01:06 AM
Nissport oil pressure gauge adapter	cossie1600	Engine & Drivetrain	18	04-01-2010 09:00 AM
What happened to the tire pressure gauge and speedo in the middle gauge cluster?	rbratton	Nissan 370Z General Discussions	33	01-24-2009 11:28 PM