Help Me Chose a Differential

HapaZ · 04-08-2015, 01:12 PM

Quote:

Originally Posted by chops

you definitely dont need 2 shafts. you dont even need a single new shaft. you can use your stock shaft and have it machined an inch off and it'll work just as well. your loss! i only know because i believe i'm the first person that pieced together a wavetrac on the boards

Hmm, I'm not doubting you about that but why does the wavtrac website list them as required parts? Annoying, but I'm sure the Quaife is going to be hell of a lot better than the open diff I've got now...

chops · 04-08-2015, 11:49 PM

Quote:

Originally Posted by HapaZ

Hmm, I'm not doubting you about that but why does the wavtrac website list them as required parts? Annoying, but I'm sure the Quaife is going to be hell of a lot better than the open diff I've got now...

ah didnt know you had an open diff. in that case, you would need to machine both your stock stubs

here's the post (definitive differential thread) for anyone who needs help in the future where i posted the differences

The Definitive Differential Thread

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help me chose a color to powdercoat!	Kayzee	Wheels & Tires	28	08-05-2014 11:12 AM
Help! Need the differential bearing size/measure for an aftermaket differential	tkramwinkel	Engine & Drivetrain	1	10-02-2012 04:49 AM
Which wheel setup would you chose?	Amuse370z	Wheels & Tires	23	09-06-2012 06:24 AM
its that time again..... help me chose a color	simota1	Exterior & Interior	18	03-13-2012 09:38 PM
Which Drop spings should I chose?	JC671	Brakes & Suspension	0	03-02-2011 03:46 AM