DIY Yaw Sensor rocker switch

Girald · 02-18-2020, 11:07 PM

Quote:

Originally Posted by SG4247

The other option is the throttle hijack feature from Ecutek.

I just got mine working, and the software changes to the ECU will now allow me to burn rubber with the brake on as far and as long as I want.

My yaw sensor has been disabled for years. That had zero impact on burnout capability.

What actually happens in your case, is that the throttles will be closed, if the ECU sees the brake switch on and the gas pedal voltage high. This effectively prevents the driver from pressing the brake and gas pedal at the same time. The yaw sensor is not an input in this case.

interesting...did yuou have to splice any ecu wires or is it straight to ecuteck via exisiting? im about about to finish off my flex tuning in the spring and might ask to have this dropped in on my phone app (bluetooth dongle).. do you know if that kills ice mode as well, or is that an abs hard disable?

Girald · 02-23-2020, 07:43 PM

BTW..

as of time of this post, i found the switches on amazon... they cost me a buck & change each and fit perfectly.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

i already hooked up my pump speed controller override, the vdc bosch box is next and have duct fan control on #3 in the works.

only thing of concern.. watch your wiring, your e brake can bump and possibly snag the wires, so keep that in mind...

and for petes sake, use spade connectors, heat shrink and solder. its a permanent install so treat it as such.

02-23-2020, 07:43 PM	#2 (permalink)
Girald Base Member Join Date: Jun 2017 Location: Denver Posts: 136 Drives: 15' 370z SpTech 6MT Rep Power: 3364	BTW.. as of time of this post, i found the switches on amazon... they cost me a buck & change each and fit perfectly. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 i already hooked up my pump speed controller override, the vdc bosch box is next and have duct fan control on #3 in the works. only thing of concern.. watch your wiring, your e brake can bump and possibly snag the wires, so keep that in mind... and for petes sake, use spade connectors, heat shrink and solder. its a permanent install so treat it as such. __________________ AAM tt'ed // Soon: Moving back to the East Coast

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yaw sensor switch	dimitarm	Exterior & Interior	33	08-09-2017 10:13 PM
YAW Sensor Rocker Switch	dP3NGU1N	DIY Section (Do-It-Yourself)	23	11-10-2013 05:57 PM
Viper Security System/Tilt sensor/Proximity sensor	kfull	Nissan 370Z General Discussions	4	04-27-2012 12:10 AM
Installed the Rocker Stripe (pic)	kent370	Member's 370Z Gallery	9	02-15-2012 03:30 PM
Rocker panel chips?	JGreenwood07	Exterior & Interior	2	07-14-2010 10:58 AM