After using the Aeroquip hose myself I would highly recommend it to everyone. Talked to a guy at my brother's shop while doing my install and he said that it's
|
|
LinkBack | Thread Tools | Display Modes |
01-29-2010, 10:05 AM | #11 (permalink) |
A True Z Fanatic
Join Date: Aug 2009
Location: Euless, TX [ DFW ]
Age: 41
Posts: 13,531
Drives: Nismo 09-0183 QAB
Rep Power: 48 |
After using the Aeroquip hose myself I would highly recommend it to everyone. Talked to a guy at my brother's shop while doing my install and he said that it's all he uses on both his cars and rock crawlers. It can be a little difficult to get it on the fitting, but once it's on you're gravy. I used zip ties just because, but they were definitely not necessary.
__________________
2009 NISMO # 0193 | QAB | Albums! | 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) | Custom Headlights | GTSPEC Braces | F.I. Long Tube Headers |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
Real Auto Dynamics built and R/T tuned built motor TT | Mr.Squeeze | Forced Induction | 132 | 04-18-2014 06:09 PM |
Anyone done a DIY for a 34r cooler install? | bigdog1250 | DIY Section (Do-It-Yourself) | 7 | 07-05-2012 10:38 AM |
Oil Cooler Install | Zedx | Engine & Drivetrain | 10 | 05-19-2011 02:35 AM |
install oil cooler? | Mt Tam I am | Nissan 370Z General Discussions | 5 | 08-25-2010 09:08 AM |