|
I have installed this mod on my '12 manual. It's been installed for about 5,500 miles now but I've noticed, while driving the tail of the dragon that my temps
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
07-25-2015, 02:11 PM
|
#18 (permalink) |
|
Base Member
Join Date: Dec 2014
Location: El Paso, TX
Posts: 39
Drives: 12 370zSport BLK M6
Rep Power: 6722   |
I have installed this mod on my '12 manual. It's been installed for about 5,500 miles now but I've noticed, while driving the tail of the dragon that my temps were right up at 220. Even with some high-rev aggressive driving, I can easily get the temp to 210.
I did install the stillen G3 intake, HFC, and exhaust as well as a uprev tune pushing the car to about 320 whp on a hot day (it was tuned on a hot day ~90F). I'm thinking about bumping up the cooler size to keep the temps down a bit more. Any ideas? Thanks |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
| Real Auto Dynamics built and R/T tuned built motor TT | Mr.Squeeze | Forced Induction | 132 | 04-18-2014 06:09 PM |
| Anyone done a DIY for a 34r cooler install? | bigdog1250 | DIY Section (Do-It-Yourself) | 7 | 07-05-2012 10:38 AM |
| Oil Cooler Install | Zedx | Engine & Drivetrain | 10 | 05-19-2011 02:35 AM |
| install oil cooler? | Mt Tam I am | Nissan 370Z General Discussions | 5 | 08-25-2010 09:08 AM |
17Likes
Threaded Mode
