![]() |
Originally Posted by wstar Putting together your own kit is fine, but please do use steel-braided lines. Things will rub on things, sometimes in ways you don't expect. Braided lines
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#13 (permalink) |
|
A True Z Fanatic
Join Date: Feb 2013
Location: Sacramento, CA
Posts: 1,372
Drives: 40th Anniversary
Rep Power: 17 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Braided lines might protect from cuts but, unless covered by another hose, are very well known to saw through anything it rubs against. Do a search for braided lines and AC condenser line cuts...you will find they are pretty damaging to whatever is around them. So you have to decide between the 2 evils.
__________________
Are U in Sacramento or Central Valley California? Click here!
Foglight Hardwire in less than 10 minutes! DIY: Automatic VDC off |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
| Real Auto Dynamics built and R/T tuned built motor TT | Mr.Squeeze | Forced Induction | 132 | 04-18-2014 06:09 PM |
| Anyone done a DIY for a 34r cooler install? | bigdog1250 | DIY Section (Do-It-Yourself) | 7 | 07-05-2012 10:38 AM |
| Oil Cooler Install | Zedx | Engine & Drivetrain | 10 | 05-19-2011 02:35 AM |
| install oil cooler? | Mt Tam I am | Nissan 370Z General Discussions | 5 | 08-25-2010 09:08 AM |