|
Braided lines are overrated and not necessary for our setup. The oil pump is not the powerful to pop the lines due to pressure. My kit was less than 250
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
09-07-2014, 11:02 PM
|
#11 (permalink) |
|
A True Z Fanatic
Join Date: Feb 2013
Location: Sacramento, CA
Posts: 1,372
Drives: 40th Anniversary
Rep Power: 17   |
Braided lines are overrated and not necessary for our setup. The oil pump is not the powerful to pop the lines due to pressure. My kit was less than 250 to put together, actually, and that was with a 24 row cooler. You're paying for the name...all coolers do the exact same thing. Mine works just as well as the $550 z1 or Stillen for half the cost. nothing is gained by purchasing name brand gear in the instance. Also racer wholesale parts.com has a complete kit for 250 with the braided lines.
Oh and you don't need a different filter btw...I used the same that is recommended for our cars from the manufacture
__________________
Are U in Sacramento or Central Valley California? Click here!
Foglight Hardwire in less than 10 minutes! DIY: Automatic VDC off |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
| Real Auto Dynamics built and R/T tuned built motor TT | Mr.Squeeze | Forced Induction | 132 | 04-18-2014 06:09 PM |
| Anyone done a DIY for a 34r cooler install? | bigdog1250 | DIY Section (Do-It-Yourself) | 7 | 07-05-2012 10:38 AM |
| Oil Cooler Install | Zedx | Engine & Drivetrain | 10 | 05-19-2011 02:35 AM |
| install oil cooler? | Mt Tam I am | Nissan 370Z General Discussions | 5 | 08-25-2010 09:08 AM |
17Likes
Threaded Mode
