DIY: Oil Cooler (scratch built install, lottsa pics).....>.

37DZ · 09-07-2014, 06:22 PM

First of all, a big THANK YOU to the OP for this thread and all of the valuable information (as well as input from all the participating members).

I'll be honest, I skipped a few pages on this thread but has anyone tried out Stillen's oil cooler that uses the Gold core instead of the Setrab? The price for a 19 row is about 350, or 24 row for $15 more(without shipping)... which isn't too much more than the OP's setup considering the kit actually includes a thermostatic plate and steel braided lines.

http://www.stillen.com/product/engin...0632-8219.html

I'm wondering if anyone has tried this kit, how they like it, and if they had any issues. Also, does the kit come with any type of warranty? Stillen website doesn't specify any warranty.

I'm seriously considering this kit for the price and convenience of having a full kit. I don't like that I will have to use a different filter but that's really just something I need to get used to when changing it, so it's not a big deal.

What are your opinions?

Thanks in advance!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Real Auto Dynamics built and R/T tuned built motor TT	Mr.Squeeze	Forced Induction	132	04-18-2014 06:09 PM
Anyone done a DIY for a 34r cooler install?	bigdog1250	DIY Section (Do-It-Yourself)	7	07-05-2012 10:38 AM
Oil Cooler Install	Zedx	Engine & Drivetrain	10	05-19-2011 02:35 AM
install oil cooler?	Mt Tam I am	Nissan 370Z General Discussions	5	08-25-2010 09:08 AM

09-07-2014, 06:22 PM	#11 (permalink)
37DZ Base Member Join Date: Sep 2013 Location: Lawrenceville, Ga Posts: 11 Drives: '11 Nissan 370z S M6 Rep Power: 12	First of all, a big THANK YOU to the OP for this thread and all of the valuable information (as well as input from all the participating members). I'll be honest, I skipped a few pages on this thread but has anyone tried out Stillen's oil cooler that uses the Gold core instead of the Setrab? The price for a 19 row is about 350, or 24 row for $15 more(without shipping)... which isn't too much more than the OP's setup considering the kit actually includes a thermostatic plate and steel braided lines. http://www.stillen.com/product/engin...0632-8219.html I'm wondering if anyone has tried this kit, how they like it, and if they had any issues. Also, does the kit come with any type of warranty? Stillen website doesn't specify any warranty. I'm seriously considering this kit for the price and convenience of having a full kit. I don't like that I will have to use a different filter but that's really just something I need to get used to when changing it, so it's not a big deal. What are your opinions? Thanks in advance!