DIY: Oil Cooler (scratch built install, lottsa pics).....>.

boosted180 · 07-16-2009, 02:20 PM

Quote:

Originally Posted by Modshack

Not sure really what you're asking, but I will say, after running this cooler for 1+ months, that it delivers pretty much all you'll need on the street. My temps run at 195-210 degrees under all conditions..

i just wanted to ask whether you think the setrab coolers are significantly better than the tru-cool. i'm planning on tracking my car, but i dont want to go through the hassle/ expense of ordering another cooler if this one is sufficient.

also, racerparts wholesale is out of the mocal sandwich plates. do you think this one would work? does it have the right specs?

Perma-Cool 186 - Perma-Cool Sandwich Oil Adapters – SummitRacing.com

i do not need a thermostatic function b/c i'm in southern california.

thanks again for all your great info.

brian

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Real Auto Dynamics built and R/T tuned built motor TT	Mr.Squeeze	Forced Induction	132	04-18-2014 06:09 PM
Anyone done a DIY for a 34r cooler install?	bigdog1250	DIY Section (Do-It-Yourself)	7	07-05-2012 10:38 AM
Oil Cooler Install	Zedx	Engine & Drivetrain	10	05-19-2011 02:35 AM
install oil cooler?	Mt Tam I am	Nissan 370Z General Discussions	5	08-25-2010 09:08 AM