|
Double sided tape works decent, but I wanted a better fit. It seemed to me that the issue was the bezel fits so close to the gear indicator that there
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
06-27-2014, 04:06 PM
|
#18 (permalink) |
|
Track Member
Join Date: Sep 2013
Location: Brookston, IN
Age: 55
Posts: 683
Drives: '12 PW Touring Sport
Rep Power: 619   |
Double sided tape works decent, but I wanted a better fit. It seemed to me that the issue was the bezel fits so close to the gear indicator that there isn't enough room for the leather boot. If you look at the bezel, you will see a small trim ring around the opening about 1/8" thick. I sanded the lip off so there is room for the leather boot. Now the bezel fits firmly back in it's original position. Very minimal modification to make it work. Not as slick looking as the manual bezel, but I didn't have to hack up my car.
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY Shift Boot Install | E-Licious | DIY Section (Do-It-Yourself) | 8 | 10-06-2020 11:36 AM |
| 7AT Shift Boot!!! | CharleyGFX | Exterior & Interior | 92 | 11-12-2015 10:44 PM |
| shift boot | dangen1980 | Exterior & Interior | 5 | 09-15-2011 02:43 PM |
| New shift boot help | theDreamer | Exterior & Interior | 4 | 01-29-2010 05:24 PM |
| WTB OEM Shift Boot. | Rps13.jw | Parts for sale (Private Classifieds) | 0 | 10-09-2009 05:43 PM |
59Likes
Threaded Mode
