DIY 370Z Car Ramp Drawings

daisuke149 · 04-21-2011, 12:59 PM

what software you usin to do that

Cmike2780 · 04-21-2011, 01:07 PM

Quote:

Originally Posted by daisuke149

what software you usin to do that

AutoCad

took like 10 minutes to draw.......then again, I draw for a living.

pa19103 · 11-14-2011, 10:31 AM

I finally built mine; work like a charm. These are solid wood and I gave them plenty of deck screws. A bit heavy but they're solid as you know what! I am sure I can put a tank on it.

I didn't have my Z up on it this time as I only need oil change on my RSX-S but you should get an idea on the second pic about their sizes and slopes.

wdkwang · 12-31-2011, 02:24 PM

vetty nice

kenchan · 12-31-2011, 06:55 PM

Would it be hard to tell if you're going up the ramp or hit the stop?

haitech · 12-31-2011, 07:56 PM

You just have to count every bump you go up?

MattP725 · 12-31-2011, 09:26 PM

Since the top bump isn't ramped like the others, it should stop the wheel assuming you are off the gas. Rhino ramps have stops no bigger than these on the top.

O&G · 12-31-2011, 09:39 PM

Quote:

Originally Posted by haitech

You just have to count every bump you go up?

or a friend to yell....STOP! Looks good, I have a similar setup!

_ace_ · 01-16-2012, 09:50 PM

I use the same thing. Our contractor gave me the leftover MDF, about 12" wide, from buildling some shelving on our new house. I cut up lengths of it and just stack them like the drawing shows. I haven't bothered to fasten them together, add stop blocks, or cut the edges to 45 degrees.

12-31-2011, 02:24 PM	#19 (permalink)
wdkwang Track Member Join Date: Nov 2010 Location: N/A Posts: 899 Drives: slidewayz Rep Power: 20	vetty nice __________________ Powerhouse Amuse \| K&N Typhoon Intakes \| MotorDyne ART Pipes \| Borla Catback Exhaust \| B&M Short Shifter \| Intake Ducts \| Ichiba 25mm F/R Spacers \| Carbon Fiber Interior Vinyl Wrap \| Tints \| 10000k HIDs \| Vtak, yo!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drawings for 2-piece, 2-stage incline Race Ramps	Fred@ReverseLogic	Reverse Logic Limited	5	03-05-2011 07:49 AM
Video: Stock 370z 0-65 (no launch) and free way on ramp (10-90) vid	houkouonchi	Nissan 370Z Photos / Spyshots / Video / Media Gallery	0	01-14-2011 04:05 AM
Rino Ramp + 2X4	cujo	DIY Section (Do-It-Yourself)	5	11-24-2010 05:06 PM
what is a 2x4 extension ramp?	zmyride	DIY Section (Do-It-Yourself)	15	05-13-2010 10:30 PM
Custom Ramp	YamahaR6	Canada	15	02-02-2010 10:30 PM

04-21-2011, 12:59 PM	#16 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	what software you usin to do that

11-14-2011, 10:31 AM	#18 (permalink)
pa19103 Base Member Join Date: Jun 2011 Location: PA Posts: 17 Drives: 2011 370z Rep Power: 13	I finally built mine; work like a charm. These are solid wood and I gave them plenty of deck screws. A bit heavy but they're solid as you know what! I am sure I can put a tank on it. I didn't have my Z up on it this time as I only need oil change on my RSX-S but you should get an idea on the second pic about their sizes and slopes.

12-31-2011, 06:55 PM	#20 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	Would it be hard to tell if you're going up the ramp or hit the stop?

12-31-2011, 07:56 PM	#21 (permalink)
haitech Track Member Join Date: Sep 2011 Location: Austin/Dallas Posts: 922 Drives: 11' 370z Magnetic M6 Rep Power: 14	You just have to count every bump you go up?

12-31-2011, 09:26 PM	#22 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 16	Since the top bump isn't ramped like the others, it should stop the wheel assuming you are off the gas. Rhino ramps have stops no bigger than these on the top.

01-16-2012, 09:50 PM	#24 (permalink)
_ace_ Base Member Join Date: May 2011 Location: USA Posts: 140 Drives: 370Z Rep Power: 13	I use the same thing. Our contractor gave me the leftover MDF, about 12" wide, from buildling some shelving on our new house. I cut up lengths of it and just stack them like the drawing shows. I haven't bothered to fasten them together, add stop blocks, or cut the edges to 45 degrees.