DIY 370Z Car Ramp Drawings

Baer383 · 04-20-2011, 05:21 PM

Quote:

Originally Posted by flashburn

Where did you get this grip tape from? I could use something like that. The stuff I put on the bottom of mine was meant for stairs, and it was stupid expensive and is pretty brittle.

I went to Home Depot(3m makes it),and go to paint dept and ask them.

It works well for me it was a after thought but when I tried them going slow one moved so I put a strip down the middle and 2 strips on the bottom now I can go as slow as I want.

I can go up and stop on every step and they don't move.

Thank god for grip tape.

flashburn · 04-20-2011, 05:26 PM

Quote:

Originally Posted by Baer383

I went to Home Depot,and go to paint dept and ask them.

It works well for me it was a after thought but when I tried them going slow one moved so I put a strip down the middle and 2 strips on the bottom now I can go as slow as I want.

I can go up and stop on every step and they don't move.

Thank god for grip tape.

Nice, I'll give that a try instead then. My garage floor is ultra slippery. I basically have to give it a good bit of gas real quick to hop up both levels. If it isn't enough or is too much, it will just slide them forward.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drawings for 2-piece, 2-stage incline Race Ramps	Fred@ReverseLogic	Reverse Logic Limited	5	03-05-2011 07:49 AM
Video: Stock 370z 0-65 (no launch) and free way on ramp (10-90) vid	houkouonchi	Nissan 370Z Photos / Spyshots / Video / Media Gallery	0	01-14-2011 04:05 AM
Rino Ramp + 2X4	cujo	DIY Section (Do-It-Yourself)	5	11-24-2010 05:06 PM
what is a 2x4 extension ramp?	zmyride	DIY Section (Do-It-Yourself)	15	05-13-2010 10:30 PM
Custom Ramp	YamahaR6	Canada	15	02-02-2010 10:30 PM