|
I was able to get the handle part separated from the assembly. I drilled the heads of some of the rivets. Then i had a local machine shop drill and
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
09-19-2017, 09:31 AM
|
#37 (permalink) |
|
Base Member
Join Date: Aug 2013
Location: Milwaukee, WI
Posts: 11
Drives: 2012 370Z NISMO
Rep Power: 13  |
I was able to get the handle part separated from the assembly. I drilled the heads of some of the rivets. Then i had a local machine shop drill and tap end end so I could re-assemble.
Check out the link to some pictures below. Nissan 370Z Forum - HockeyAnimal1's Album: Door Handle Project I thought it was worth the trouble to make sure the paint was even. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Door Panel Removal & Door Speaker Size | jikhead | DIY Section (Do-It-Yourself) | 46 | 07-16-2016 10:04 PM |
| Door handle rattles from outside...anyone? | zaust | Exterior & Interior | 1 | 02-27-2012 03:21 PM |
| 370z door handle swap? | ThoriumHotdog | Exterior & Interior | 11 | 11-03-2010 10:44 PM |
| EVO-R door handle review by SIMOTA1 | simota1 | Exterior & Interior | 12 | 09-09-2010 09:56 PM |
| tried to remove door handle...Fail | Soon | DIY Section (Do-It-Yourself) | 4 | 08-02-2010 04:03 PM |
27Likes
Threaded Mode
