DIY-Door handle removal

Volk Z · 09-06-2013, 07:28 PM

Quote:

Originally Posted by MarlinZ

Does anybody know the size of the little screws?

I belive they were 4MM X 1/4 inch. Just go to the hardware store you can get stainless for half the price and not have to wait for Nissan to waste. Hours of your life finding out what screws they are and 1 week to order/receive.

If anyone stripped them like I did I took a hacksaw and made a straight line across then simply used a flathead and they came out.

equalme · 01-07-2014, 06:50 PM

Quote:

Originally Posted by Volk Z

I belive they were 4MM X 1/4 inch. Just go to the hardware store you can get stainless for half the price and not have to wait for Nissan to waste. Hours of your life finding out what screws they are and 1 week to order/receive.

If anyone stripped them like I did I took a hacksaw and made a straight line across then simply used a flathead and they came out.

They are #6 screws. I happened to first purchase the #4, too small, then went back and got #8, too big, and finally got the #6 - perfect. I got the stainless steel flat screws with washers.

#6-1/2" is the what I ended up using.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Door Panel Removal & Door Speaker Size	jikhead	DIY Section (Do-It-Yourself)	46	07-16-2016 10:04 PM
Door handle rattles from outside...anyone?	zaust	Exterior & Interior	1	02-27-2012 03:21 PM
370z door handle swap?	ThoriumHotdog	Exterior & Interior	11	11-03-2010 10:44 PM
EVO-R door handle review by SIMOTA1	simota1	Exterior & Interior	12	09-09-2010 09:56 PM
tried to remove door handle...Fail	Soon	DIY Section (Do-It-Yourself)	4	08-02-2010 04:03 PM