|
I tried that also. Those 2 screws were way too tight. I couldn't get the leverage (due to the attached wires) to unscrew. I was afraid of stripping them. It
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
06-21-2016, 10:00 AM
|
#34 (permalink) |
|
Base Member
Join Date: Mar 2016
Location: Fort Lauderdale
Posts: 73
Drives: '16 370z NISMO
Rep Power: 11  |
I tried that also. Those 2 screws were way too tight. I couldn't get the leverage (due to the attached wires) to unscrew. I was afraid of stripping them. It was hard to hold the part and unscrew something so tight. I agree with you though, it is easier your way, if you can.
When my magnetic socket fell in the door, I just removed my speaker and used a telescopic magnet. That was probably the easiest part of the job. LoL |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Door Panel Removal & Door Speaker Size | jikhead | DIY Section (Do-It-Yourself) | 46 | 07-16-2016 10:04 PM |
| Door handle rattles from outside...anyone? | zaust | Exterior & Interior | 1 | 02-27-2012 03:21 PM |
| 370z door handle swap? | ThoriumHotdog | Exterior & Interior | 11 | 11-03-2010 10:44 PM |
| EVO-R door handle review by SIMOTA1 | simota1 | Exterior & Interior | 12 | 09-09-2010 09:56 PM |
| tried to remove door handle...Fail | Soon | DIY Section (Do-It-Yourself) | 4 | 08-02-2010 04:03 PM |
27Likes
Threaded Mode
