|
You don't need to disconnect the wiring for the button. Just loosen one and unscrew the other of the two Phillips screws that hold the button in place in the
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
06-21-2016, 12:53 AM
|
#32 (permalink) |
|
A True Z Fanatic
 
Join Date: May 2016
Location: Calgary
Posts: 3,799
Drives: 16 370z
Rep Power: 94683   |
You don't need to disconnect the wiring for the button. Just loosen one and unscrew the other of the two Phillips screws that hold the button in place in the back of the handle. Once it's out just pop the button out from the rubber retainer.
Piece of cake. Here's a quick pic from the handles I removed (I ordered a second set to paint so I could get them ready and not be without in the meantime). The metal cover plate at the bottom marked with an L and attached with one screw is what I'm talking about. Last edited by ChaseZ; 07-09-2017 at 06:24 PM. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Door Panel Removal & Door Speaker Size | jikhead | DIY Section (Do-It-Yourself) | 46 | 07-16-2016 10:04 PM |
| Door handle rattles from outside...anyone? | zaust | Exterior & Interior | 1 | 02-27-2012 03:21 PM |
| 370z door handle swap? | ThoriumHotdog | Exterior & Interior | 11 | 11-03-2010 10:44 PM |
| EVO-R door handle review by SIMOTA1 | simota1 | Exterior & Interior | 12 | 09-09-2010 09:56 PM |
| tried to remove door handle...Fail | Soon | DIY Section (Do-It-Yourself) | 4 | 08-02-2010 04:03 PM |
27Likes
Threaded Mode
