Nissan 370Z Forum - View Single Post - DIY-Door handle removal

bumblez · 01-16-2011, 01:22 PM

I know there's already has DIY by 209Z DIY Removal of Door Handles , but had no pics of installation. So here it is

Tools Required:
Rachet&10mm socket
Flat head screw driver(for

Driver's
1. Locate& remove 2 rubber grommets.

2.unbolt the 3, 10mm bolts. 1on top hole and 2 on bottom hole.
*Be careful Screw can fall inside the door. I used magnetic screw driver*

3.pull up & out on the door handles.

4.You will see two wires. One for the Keyless entry(black wire) and other wire to physically open the door(Metal wire). Pop out 2 clips that holding the black wire and disconnect. And pop out the metal wire.

5. Driver's side done. Take 5 min brake

Passenger's

The only difference between Driver's and Passenger's is number of bolts.
Driver's has 3 10mm bolts and Passenger's has 2 10mm bolts. Other then its almost same.

All Finish!! Do whateva u want!! (Paint or Replace with others)
I swapped mine with Simot1's CF door handles. Thanks Simot!!

+Rep Me if I helped.

01-16-2011, 01:22 PM	#1 (permalink)
bumblez Enthusiast Member Join Date: Sep 2009 Location: VA Posts: 326 Drives: Amuse 370z Rep Power: 15	DIY-Door handle removal I know there's already has DIY by 209Z DIY Removal of Door Handles , but had no pics of installation. So here it is Tools Required: Rachet&10mm socket Flat head screw driver(for Driver's 1. Locate& remove 2 rubber grommets. 2.unbolt the 3, 10mm bolts. 1on top hole and 2 on bottom hole. Be careful Screw can fall inside the door. I used magnetic screw driver 3.pull up & out on the door handles. 4.You will see two wires. One for the Keyless entry(black wire) and other wire to physically open the door(Metal wire). Pop out 2 clips that holding the black wire and disconnect. And pop out the metal wire. 5. Driver's side done. Take 5 min brake Passenger's The only difference between Driver's and Passenger's is number of bolts. Driver's has 3 10mm bolts and Passenger's has 2 10mm bolts. Other then its almost same. All Finish!! Do whateva u want!! (Paint or Replace with others) I swapped mine with Simot1's CF door handles. Thanks Simot!! +Rep Me if I helped.