DIY: STILLEN 370Z Front Splitter Install

Paul_S

Nice guide

Did you drill a pilot hole for the screws or just wind them in?

I think the only thing I might change is to use some black screws or different fixings where you can see them in the wheel arch.

I'd like to see one on a yellow 370

__________________

TypeOne

They are self tapping, so you don't need to drill a pilot hole.

I used a blotch of black touch up paint and dabbed the side screws with it so they are less noticeable. Alternatively, you could use a standard automotive clip, one you'd find in the misc hardware section of your local auto parts store.

For those, you would need to drill a pilot hole.