DIY: Parking Light LED Install

TROOPER · 08-07-2010, 08:22 AM

OK, so I changed my parking lights today with LED bulbs from V-LED.

Here is the link to buy the bulbs:
2 V-LEDS 6K WHITE 194 13 LED LIGHT BULBS 158 168 2825
2 V-LEDS 6K WHITE 194 13 LED LIGHT BULBS 158 168 2825

This is real easy and only took 5 minutes per side, and that included taking pictures

Not much to say about the install that you can't see from following the pictures below.
The best way to access these bulbs is through the wheel arch.

Starting at the drivers side, turn the wheels full lock to the right,
this will give you access to pull the liner back.

Remove 2 clips as shown in the pics, one is at the middle edge of the liner, the other is the lower edge of the liner.
Just pop these out with a flat blade screwdriver, and be gentle.

Locate and remove the parking light, remember... lefty loosey, righty tighty

If you look closely at the pictures, I have circled the liner clips, and the parking bulb in yellow.

NOTE:
Now LED lights have voltage polarity, so although the bulb will fit in either way round, it will only function if it's in correctly.
After putting the bulb in, turn the lights on to test it as shown in the pics, BEFORE you put it all back together.

Now replace the liner and complete the process on the passanger side.
Remember to turn the wheels full lock to the left this time.

Some before-and-after pics also included:

Hope it helps,
TROOPER

Brannisa · 08-07-2010, 08:45 AM

Thanks Trooper! Its always nice to see some pictures on the install.

TROOPER · 08-07-2010, 08:48 AM

Well as my dear Mom always says, you can always say thank you with flowers.

I say you could do it better with +1 REP

fullmonty · 08-07-2010, 01:13 PM

Cool write up, I just ordered these the other night!
+1

Joka4411 · 08-10-2010, 12:43 PM

Cool, I just ordered them last night ,Cant wait till they arrive.

TROOPER · 08-10-2010, 01:42 PM

Quote:

Originally Posted by Joka4411

Cool, I just ordered them last night ,Cant wait till they arrive.

Good luck... I've just ordered LEDs for my tail lights, but there's already a DIY for that.
But I might take some pictures anyway.

madonps · 08-11-2010, 08:31 AM

Very nice thanks! But do they match the OEM low beams? Or are they a different color?

madonps · 08-11-2010, 08:31 AM

Quote:

Originally Posted by TROOPER

Good luck... I've just ordered LEDs for my tail lights, but there's already a DIY for that.
But I might take some pictures anyway.

Which part of the taillights?

TROOPER · 08-11-2010, 08:44 AM

Quote:

Originally Posted by madonps

Which part of the taillights?

LED/Bulb...LOL .... How many parts are there??

madonps · 08-11-2010, 08:52 AM

Quote:

Originally Posted by TROOPER

LED/Bulb...LOL .... How many parts are there??

Reverse light/Turn signal?

TROOPER · 08-11-2010, 09:07 AM

Quote:

Originally Posted by madonps

Reverse light/Turn signal?

OOPS my bad LOL... I meant I had ordered LEDs for my license plate light

m4a1mustang · 08-11-2010, 09:09 AM

wewt! +1

Mr370z · 08-12-2010, 12:32 AM

thanks for this Trooper.. will order some when they are back in stock!.. would alos love to know exactly which LEDs your ordered for your licence plate too. Can you give me a link to the exact ones!

And pls do a DIY thread for that too!! your a champ!

TROOPER · 08-12-2010, 06:52 AM

Quote:

Originally Posted by Mr370z

thanks for this Trooper.. will order some when they are back in stock!.. would alos love to know exactly which LEDs your ordered for your licence plate too. Can you give me a link to the exact ones!

And pls do a DIY thread for that too!! your a champ!

Here's the link to my album for the license plate install (no DIY)
Nissan 370Z Forum - TROOPER's Album: DIY: License Plate LED Install

Here's a link to the License Plate DIY by AK370Z
DIY: License Plate LED bulb Installation

This link to the DIY also contains the link to the V-LEDS website for the bulbs

madonps · 08-12-2010, 07:28 AM

Very nice thanks! But do they match the OEM low beams? Or are they a different color?

08-07-2010, 08:22 AM	#1 (permalink)
TROOPER A True Z Fanatic Join Date: Jun 2010 Location: Baltimore, MD Posts: 1,297 Drives: Your Tax Dollars Rep Power: 16	DIY: Parking Light LED Install OK, so I changed my parking lights today with LED bulbs from V-LED. Here is the link to buy the bulbs: 2 V-LEDS 6K WHITE 194 13 LED LIGHT BULBS 158 168 2825 2 V-LEDS 6K WHITE 194 13 LED LIGHT BULBS 158 168 2825 This is real easy and only took 5 minutes per side, and that included taking pictures Not much to say about the install that you can't see from following the pictures below. The best way to access these bulbs is through the wheel arch. Starting at the drivers side, turn the wheels full lock to the right, this will give you access to pull the liner back. Remove 2 clips as shown in the pics, one is at the middle edge of the liner, the other is the lower edge of the liner. Just pop these out with a flat blade screwdriver, and be gentle. Locate and remove the parking light, remember... lefty loosey, righty tighty If you look closely at the pictures, I have circled the liner clips, and the parking bulb in yellow. NOTE: Now LED lights have voltage polarity, so although the bulb will fit in either way round, it will only function if it's in correctly. After putting the bulb in, turn the lights on to test it as shown in the pics, BEFORE you put it all back together. Now replace the liner and complete the process on the passanger side. Remember to turn the wheels full lock to the left this time. Some before-and-after pics also included: Hope it helps, TROOPER 370zBoyz likes this. __________________ Darren "Guv Motors Passion Wagon" Last edited by TROOPER; 08-07-2010 at 08:29 AM.

08-07-2010, 08:48 AM	#3 (permalink)
TROOPER A True Z Fanatic Join Date: Jun 2010 Location: Baltimore, MD Posts: 1,297 Drives: Your Tax Dollars Rep Power: 16	Well as my dear Mom always says, you can always say thank you with flowers. I say you could do it better with +1 REP __________________ Darren "Guv Motors Passion Wagon"

08-07-2010, 01:13 PM	#4 (permalink)
fullmonty A True Z Fanatic Join Date: Nov 2009 Location: Dirty Jersey Posts: 7,762 Drives: 370 Touring/Sport Rep Power: 33	Cool write up, I just ordered these the other night! +1 __________________

08-11-2010, 09:09 AM	#12 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	wewt! +1 __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - Parking/Running Light LED replacement	TARDCORE	DIY Section (Do-It-Yourself)	14	10-28-2013 12:40 AM
LED (v-leds) parking light bulb melted off, now headlamp goes off occasionally	darkseed	Nissan 370Z General Discussions	9	03-09-2010 11:15 PM
Yourledshop.com Running/Parking Light LED replacements PIC HEAVY	TARDCORE	Exterior & Interior	11	02-22-2010 09:31 AM
Parking light replacement.	tbonesteak	Exterior & Interior	6	01-04-2010 10:47 PM
Parking light LEDs, am I Retarded?	junior_jam	Exterior & Interior	5	10-18-2009 10:26 PM

08-07-2010, 08:45 AM	#2 (permalink)
Brannisa Base Member Join Date: Jul 2010 Location: Florida Posts: 14 Drives: 10 -370Z - PG 7AT Rep Power: 14	Thanks Trooper! Its always nice to see some pictures on the install.

08-10-2010, 12:43 PM	#5 (permalink)
Joka4411 Base Member Join Date: May 2010 Location: Baltimore Md Posts: 131 Drives: 40th anniver 370Z Rep Power: 14	Cool, I just ordered them last night ,Cant wait till they arrive.

08-11-2010, 08:31 AM	#7 (permalink)
madonps Base Member Join Date: Jun 2010 Location: PA Posts: 30 Drives: '11 Mustang GT/CS Rep Power: 14	Very nice thanks! But do they match the OEM low beams? Or are they a different color?

08-12-2010, 12:32 AM	#13 (permalink)
Mr370z Base Member Join Date: Mar 2010 Location: Melbourne Posts: 78 Drives: 370z Roadster! Rep Power: 15	thanks for this Trooper.. will order some when they are back in stock!.. would alos love to know exactly which LEDs your ordered for your licence plate too. Can you give me a link to the exact ones! And pls do a DIY thread for that too!! your a champ!

08-12-2010, 07:28 AM	#15 (permalink)
madonps Base Member Join Date: Jun 2010 Location: PA Posts: 30 Drives: '11 Mustang GT/CS Rep Power: 14	Very nice thanks! But do they match the OEM low beams? Or are they a different color?