DIY: Installing Aftermarket Radio

Cold Deck · 01-26-2011, 07:13 PM

This is very helpful. Please help me get started, i.e with step 1...is there anywhere in particular to start prying the silver ring? Is there anything to know about the clips to keep them from bending or flying off?

I have been looking at the ring every drive trying to figure out how to get it off without scratching or dinging it up.

Thanks again.

Wicked CAS · 02-08-2011, 09:26 AM

This is a great thread.

Scubasteve · 07-18-2011, 03:06 PM

Quote:

Originally Posted by Cold Deck

This is very helpful. Please help me get started, i.e with step 1...is there anywhere in particular to start prying the silver ring? Is there anything to know about the clips to keep them from bending or flying off?

I have been looking at the ring every drive trying to figure out how to get it off without scratching or dinging it up.

Thanks again.

i went from the inside. like grab the bottom of the ring from the fabric side and pull up. you can grab the bottom of it this way

View Poll Results: Did this help?
Yes	194	85.84%
No	11	4.87%
Somewhat	21	9.29%
Voters: 226. You may not vote on this poll

02-08-2011, 09:26 AM	#2 (permalink)
Wicked CAS The370Z.com Sponsor Join Date: Jan 2010 Location: Kingston, NH. Posts: 469 Drives: 98 Supra 1036 RWHP Rep Power: 17	This is a great thread. __________________ www.wickedcas.com Call: 603-642-4222 E-mail: Wickedcas@aol.com *DIRECT AUTHORIZED DEALER FOR:* AUDISON, HERTZ, JL AUDIO, JL AUDIO MARINE, KENWOOD EXCELON, COMPUSTAR, DIAMOND AUDIO, CACHE, ARC AUDIO, K40, PASSPORT ESCORT.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Installing Amp to stock radio using Fierce Audio line converter	VDC_OFF	DIY Section (Do-It-Yourself)	5	07-20-2016 05:41 PM
DIY: Installing aftermarket aluminum pedals....	Modshack	DIY Section (Do-It-Yourself)	55	08-21-2014 09:52 AM
aftermarket radio?	henryy370z	Audio & Video	18	08-11-2012 11:37 AM
Question about installing aftermarket navi in touring bose Z	ChrisK	Audio & Video	4	10-29-2010 05:18 PM
installing aftermarket nav	js1	Exterior & Interior	6	09-28-2010 05:59 AM

01-26-2011, 07:13 PM	#1 (permalink)
Cold Deck Base Member Join Date: Jun 2010 Location: Raleigh, NC Posts: 1 Drives: 2010 370z Auto Rep Power: 16	This is very helpful. Please help me get started, i.e with step 1...is there anywhere in particular to start prying the silver ring? Is there anything to know about the clips to keep them from bending or flying off? I have been looking at the ring every drive trying to figure out how to get it off without scratching or dinging it up. Thanks again.