DIY: Installing aftermarket aluminum pedals....

Modshack · 09-20-2009, 12:37 PM

For those of us with the standard and sport options, the pedals are nothing to write home about. A little dowdy and a little plain. To upgrade to the Touring aluminum "trimmed" pedals costs almost $300 (yikes!) A better way for real pedals was to have some custom designed for the Z. I worked with SRP Racing - Custom Aluminum Racing Pedals To come up with something a bit more serious. Here's the final product in the "Grip" finish:

First, place the Gas pedal over the stock part and mark the attachment holes. Drill some pilots and attach with the supplied screws:

For the brake and clutch, remove the rubber pads, align the new pedals and again mark for drilling:

Drilling the top holes(s) is a little trickier due to clearances. I used a 90 degree drill adapter, but you could also have someone hold the pedals down with the edge of their foot to get a better angle:

Final drill 11/64th holes and attach with included hardware:

On the footrest, I don't have pictures, but you can do this several ways. There are 6 plastic pins that go through the carpet and are attached with metal push on clips. Using a trim tool you can pop this off from the outside, or remove the 2 Plastic nuts at the top edge of the carpet and pull the whole thing back and pop the clips off from the rear. Attaching the footrest required longer screws than supplied due to the carpet thickness and the Styrofoam base underneath. I used 3 1" stainless screws through the carpet and into the Styrofoam. Seems plenty sturdy:

Done! Serious grip and a serious look for about $69-$139 depending on Options and finish work...

theDreamer · 09-20-2009, 12:39 PM

Great write up.

mrarroyo · 09-20-2009, 05:50 PM

Very nice! I wonder how these would look in a charcoal grey finish. But I wonder how long the anodized finish would last with day in and day out use.

chris410 · 09-20-2009, 05:58 PM

nice write-up!

m4a1mustang · 09-20-2009, 06:09 PM

Nice!

kenchan · 09-20-2009, 07:20 PM

nice job.

i got one of these guys.

Zcott · 09-22-2009, 09:41 PM

Great stuff Mod!

I just ordered a set, so you should get your commission check shortly.

shabarivas · 09-23-2009, 12:50 AM

Seriously nice work! I wonder if they have a finish thats closer to the stock aluminum ones from nissan?

Zcott · 09-23-2009, 09:40 AM

I liked the machined finish better, so I went with those...

Modshack · 09-23-2009, 11:01 AM

Quote:

Originally Posted by Zcott

Great stuff Mod!

I just ordered a set, so you should get your commission check shortly.

LOL...I guess you could say my assist with SRP has been passed along to you with the current "sale" pricing. Hope you like em...I do!

Zcott · 10-01-2009, 05:00 PM

Mine arrived yesterday, and will be installed this weekend.
Thought I'd put up a pic so folks can see the difference in Mod's finish and mine which is "machined".

Modshack · 10-01-2009, 06:47 PM

Quote:

Originally Posted by Zcott

Thought I'd put up a pic so folks can see the difference in Mod's finish and mine which is "machined".

Different!

TonyBPD · 10-01-2009, 08:55 PM

Very nice!

flashburn · 10-05-2009, 11:22 AM

Quote:

Originally Posted by Zcott

Mine arrived yesterday, and will be installed this weekend.
Thought I'd put up a pic so folks can see the difference in Mod's finish and mine which is "machined".

Mind putting up a pic with them installed too? Thanks!

Zcott · 10-06-2009, 11:42 AM

I'll post some pics as soon as I get them in.
Between bad weather, and some family stuff coming up I haven't had time to do the work yet...

09-20-2009, 12:37 PM	#1 (permalink)
Modshack A True Z Fanatic Join Date: Mar 2009 Location: Greenville NC Posts: 2,883 Drives: 370Z Sport Rep Power: 976	DIY: Installing aftermarket aluminum pedals.... For those of us with the standard and sport options, the pedals are nothing to write home about. A little dowdy and a little plain. To upgrade to the Touring aluminum "trimmed" pedals costs almost $300 (yikes!) A better way for real pedals was to have some custom designed for the Z. I worked with SRP Racing - Custom Aluminum Racing Pedals To come up with something a bit more serious. Here's the final product in the "Grip" finish: First, place the Gas pedal over the stock part and mark the attachment holes. Drill some pilots and attach with the supplied screws: For the brake and clutch, remove the rubber pads, align the new pedals and again mark for drilling: Drilling the top holes(s) is a little trickier due to clearances. I used a 90 degree drill adapter, but you could also have someone hold the pedals down with the edge of their foot to get a better angle: Final drill 11/64th holes and attach with included hardware: On the footrest, I don't have pictures, but you can do this several ways. There are 6 plastic pins that go through the carpet and are attached with metal push on clips. Using a trim tool you can pop this off from the outside, or remove the 2 Plastic nuts at the top edge of the carpet and pull the whole thing back and pop the clips off from the rear. Attaching the footrest required longer screws than supplied due to the carpet thickness and the Styrofoam base underneath. I used 3 1" stainless screws through the carpet and into the Styrofoam. Seems plenty sturdy: Done! Serious grip and a serious look for about $69-$139 depending on Options and finish work... ChaseZ and NismoZ3409 like this. __________________ Steal my car! (SOLD)...Now Porsche Cayman S Oil Cooler DIY: Here! Last edited by Modshack; 10-11-2009 at 07:40 PM.

09-20-2009, 12:39 PM	#2 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Great write up. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

09-20-2009, 05:58 PM	#4 (permalink)
chris410 Enthusiast Member Join Date: Jul 2009 Location: Virginia Posts: 345 Drives: 10' GT500 Rep Power: 15	nice write-up! __________________ Chris Current: 2014 WRX Stage I + SPT / 2013 Hayabusa 202HP Former:09 370Z 7-AT PW/Ark Type 2 exhaust/Evo R lip/TSW Nurburgring carbon

09-20-2009, 06:09 PM	#5 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	Nice! __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Discount on SRPRacing Aluminum Pedals	WAGAWAGA	Nissan 370Z General Discussions	4	09-10-2011 11:39 AM
FS: SRP Grid finish aluminum Pedals....>	Modshack	Parts for sale (Private Classifieds)	9	06-08-2010 07:28 PM
370z aluminum trimmed pedals	dcrew1x	Wanted	9	10-27-2009 10:06 PM
Research: Touring Aluminum Pedals onto Base	GonGo	DIY Section (Do-It-Yourself)	10	09-21-2009 12:30 PM
Solid Aluminum Pedals for the 370....>	Modshack	Exterior & Interior	5	09-20-2009 12:42 PM

09-20-2009, 05:50 PM	#3 (permalink)
mrarroyo Base Member Join Date: Jun 2009 Location: Heaven on Earth Posts: 211 Drives: 09 Nissan 370Z M6 Rep Power: 15	Very nice! I wonder how these would look in a charcoal grey finish. But I wonder how long the anodized finish would last with day in and day out use.

09-20-2009, 07:20 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	nice job. i got one of these guys.

09-22-2009, 09:41 PM	#7 (permalink)
Zcott Base Member Join Date: Jun 2009 Location: D/FW, Texas Posts: 89 Drives: 09 370Z Sport PG M6 Rep Power: 15	Great stuff Mod! I just ordered a set, so you should get your commission check shortly.

09-23-2009, 12:50 AM	#8 (permalink)
shabarivas A True Z Fanatic Join Date: Apr 2009 Location: Sacramento, CA Posts: 2,188 Drives: 370z MB 6mt Rep Power: 914	Seriously nice work! I wonder if they have a finish thats closer to the stock aluminum ones from nissan?

09-23-2009, 09:40 AM	#9 (permalink)
Zcott Base Member Join Date: Jun 2009 Location: D/FW, Texas Posts: 89 Drives: 09 370Z Sport PG M6 Rep Power: 15	I liked the machined finish better, so I went with those...

10-01-2009, 05:00 PM	#11 (permalink)
Zcott Base Member Join Date: Jun 2009 Location: D/FW, Texas Posts: 89 Drives: 09 370Z Sport PG M6 Rep Power: 15	Mine arrived yesterday, and will be installed this weekend. Thought I'd put up a pic so folks can see the difference in Mod's finish and mine which is "machined".

10-01-2009, 08:55 PM	#13 (permalink)
TonyBPD Track Member Join Date: May 2009 Location: South Jersey Posts: 614 Drives: 2012 VW Golf R Rep Power: 16	Very nice!

10-06-2009, 11:42 AM	#15 (permalink)
Zcott Base Member Join Date: Jun 2009 Location: D/FW, Texas Posts: 89 Drives: 09 370Z Sport PG M6 Rep Power: 15	I'll post some pics as soon as I get them in. Between bad weather, and some family stuff coming up I haven't had time to do the work yet...