DIY: GTR Red Start-Stop Button Swap out

ScGRaceR · 07-14-2010, 06:14 PM

Quote:

Originally Posted by Zeto

Still on backorder but they said that they would recieve them by the last week of July.

mine is on back order from a dealer too

TreeSemdyZee · 07-14-2010, 06:33 PM

Quote:

Originally Posted by Zeto

Still on backorder but they said that they would recieve them by the last week of July.

Some people ship quicker than that.

(went out today BTW).

Zeto · 07-14-2010, 09:28 PM

Quote:

Originally Posted by TreeSemdyZee

Some people ship quicker than that.

(went out today BTW).

What went out today?

TreeSemdyZee · 07-14-2010, 09:30 PM

Quote:

Originally Posted by Zeto

What went out today?

Knob.

memorylasts · 07-14-2010, 06:25 PM

i ordered mine last thursday got it yesterday, and damn it is nice...

Thanks for the DIY!

my parts guy told me that there were some 45 on back order for the nation i assume most of them coming from this thread!

Zeto · 07-14-2010, 09:27 PM

Quote:

Originally Posted by memorylasts

i ordered mine last thursday got it yesterday, and damn it is nice...

Thanks for the DIY!

my parts guy told me that there were some 45 on back order for the nation i assume most of them coming from this thread!

From where!?

memorylasts · 07-15-2010, 05:22 AM

Quote:

Originally Posted by Zeto

From where!?

Mossy Nissan
El Cajon, CA 92020
Parts: (888) 318-2390

don't know the zip off the top of my head.

'10Anamoly · 07-15-2010, 06:49 AM

I also had to take the kneepads off to get this done right for my car (stick shift). There is one screw holding them down and the rest are metal snap clips. They come off pretty easily.

Trips · 07-15-2010, 10:14 AM

Quote:

Originally Posted by '10Anamoly

I also had to take the kneepads off to get this done right for my car (stick shift). There is one screw holding them down and the rest are metal snap clips. They come off pretty easily.

Thanks '10Anamoly, I updated the Org post to include that info for others.

TreeSemdyZee · 07-17-2010, 07:42 PM

Quote:

Originally Posted by '10Anamoly

I also had to take the kneepads off to get this done right for my car (stick shift). There is one screw holding them down and the rest are metal snap clips. They come off pretty easily.

??? There are two screws holding on the kneepads. One is on dash (vertical) and one is on the center console (vertical).

NewYorkJon34 · 07-14-2010, 07:36 PM

I ordered mine from the Courtesy Nissan website, it took about a week. I'm glad I ordered mine before everyone started too. No backorder 4 me

TreeSemdyZee · 07-14-2010, 07:46 PM

Quote:

Originally Posted by NewYorkJon34

I ordered mine from the Courtesy Nissan website, it took about a week. I'm glad I ordered mine before everyone started too. No backorder 4 me

j/k

Ordered mine 6/28. Still waiting.

NewYorkJon34 · 07-14-2010, 08:38 PM

lol, did they give you a tracking number?

TreeSemdyZee · 07-14-2010, 09:28 PM

Oh, my mistake 6/26.

No tracking number. Still shows backordered on my order. I need a red button. Tired of looking tehgrey

button.

Matt · 07-14-2010, 10:50 PM

Anyone online that's done this installation? I've finally got everything taken apart (different than the OP, to my surprise) but the OEM ignition assembly isn't pulling out of the housing. I've tried "compressing the sides", and it's not budging. If I squeeze anymore, it's gonna make like a zit and plastic pieces are gonna fly all over the place.

Anyone have trouble pulling the old ignition out?

07-14-2010, 06:25 PM	#5 (permalink)
memorylasts A True Z Fanatic Join Date: Mar 2010 Location: San Diego Posts: 1,125 Drives: Cars... Rep Power: 19	i ordered mine last thursday got it yesterday, and damn it is nice... Thanks for the DIY! my parts guy told me that there were some 45 on back order for the nation i assume most of them coming from this thread! __________________ somewhat-journal-thingy

07-15-2010, 06:49 AM	#8 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 18	I also had to take the kneepads off to get this done right for my car (stick shift). There is one screw holding them down and the rest are metal snap clips. They come off pretty easily. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

07-14-2010, 10:50 PM	#15 (permalink)
Matt A True Z Fanatic Join Date: Oct 2009 Location: Augusta, GA Age: 43 Posts: 1,680 Drives: 2010 Avalanche LT Rep Power: 20	Anyone online that's done this installation? I've finally got everything taken apart (different than the OP, to my surprise) but the OEM ignition assembly isn't pulling out of the housing. I've tried "compressing the sides", and it's not budging. If I squeeze anymore, it's gonna make like a zit and plastic pieces are gonna fly all over the place. Anyone have trouble pulling the old ignition out? __________________ "Any man who can drive a 370z while kissing a pretty girl is simply not giving the Z the attention it deserves." Albert Einstein....modified.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ridiculous start/stop button question...	KillerBee370	Nissan 370Z General Discussions	53	07-26-2012 08:42 AM
Alternate Method for GTR Red Start-Stop Button Swap	Zmax	DIY Section (Do-It-Yourself)	9	03-24-2012 09:26 AM
[FOR SALE] GTR Start/Stop Button	chuckd05	Parts for sale (Private Classifieds)	17	09-13-2011 06:46 AM
GTR start stop button	Reaper42	Exterior & Interior	24	09-12-2010 01:09 AM
Start-Stop Button swap out	Minicobra1	Exterior & Interior	53	05-04-2010 03:19 AM

07-14-2010, 07:36 PM	#11 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1067	I ordered mine from the Courtesy Nissan website, it took about a week. I'm glad I ordered mine before everyone started too. No backorder 4 me

07-14-2010, 08:38 PM	#13 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1067	lol, did they give you a tracking number?

07-14-2010, 09:28 PM	#14 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 62 Posts: 4,888 Drives: '09 370 & ‘14 Juke Rep Power: 27410	Oh, my mistake 6/26. No tracking number. Still shows backordered on my order. I need a red button. Tired of looking tehgrey button.