DIY: GTR Red Start-Stop Button Swap out

SAMSKEE · 03-16-2012, 07:43 PM

Had it installed in less than 10 minutes. Easy easy easy! Thanks to this writeup I saved a lot of my time. Thanks!!

CMills18 · 03-20-2012, 09:00 AM

Thanks for putting this up man it helped out a lot and didn't even take me that long to install at all.

omgZ · 03-29-2012, 03:46 PM

Thanks for the great write up.

omgZ · 03-29-2012, 03:51 PM

I just noticed that my stock button doesn't say "Engine"

LMBmikeZ · 04-24-2012, 07:15 AM

^^yep! We got a fully loaded Z for our 40th! There was also the option for AT7 instead of the MT6! In Canada we got the better version IMO!

FairladyZ · 04-25-2012, 05:14 AM

I read through this whole thing but wanted to be sure before I start.

I only have like 200 miles new car.

Anyways for 6 speed where do I pry with my screw driver? I'm gonna wrap it with tape then pry at the silver bezel correct? But can someone give me a specific location on the bezel? Also do I remove the bezel below that one? The black one it sits on?

chevytrucker · 04-26-2012, 01:18 PM

Quote:

Originally Posted by FairladyZ

I read through this whole thing but wanted to be sure before I start.

I only have like 200 miles new car.

Anyways for 6 speed where do I pry with my screw driver? I'm gonna wrap it with tape then pry at the silver bezel correct? But can someone give me a specific location on the bezel? Also do I remove the bezel below that one? The black one it sits on?

I've done 2 on the 7AT cars now and I was able to just pop off that bezel with my hands. I don't know if the manual one is harder to pull off. When I did it the first time, it didn't really start to make sense until I started pulling things off, then I could see in front of me where everything was and had it done in 5 minutes. I can't imagine the MT would be much harder, but it is possible. I would say just start pulling things apart, and be careful.

bonfire · 06-21-2012, 12:11 PM

Finished mine last night. Literally took 5 min. I just popped the bezel off with my hands. I was worried I would break something as I was pulling on the bezel, but just as I thought it might be too much pressure it popped up....

Glasgow Smile · 06-21-2012, 01:37 PM

Just wanted to say thanks for this thread, walked outside at lunch with a screwdriver and switched them out in less than 10 min.

shika805 · 06-25-2012, 01:21 PM

^did the same thing! Did in on my 15 min break from work. Just used a Philips screwdriver and it was a done deal

thanks a lot!!!!

tim_leary01 · 07-04-2012, 08:45 PM

Just did this mod today. I was freaked that I would snap/break some plastic taking everything apart but thanks to this thread it was super easy. I did it in 10 minutes before I ran some errands. Thanks!

Trips · 09-20-2012, 09:49 PM

Sorry to hear about that BUT what prompted you to do that?

You're probably the first to have done that

Not a bad thing I was just curious

Speedy · 09-21-2012, 10:57 AM

To reset air bag light. It pays to search this forum before going to the dealer.

Flashing Airbag Light After HU Install

mwhit02 · 09-21-2012, 03:58 PM

unfortunately when installed my button the forums were down, hence i could no searching

billas 370z · 11-16-2012, 03:13 PM

Just got my big red button together with the rear fog light in preparation for my Z's arrival. Good write up. Thanks.

04-24-2012, 07:15 AM	#5 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10351	^^yep! We got a fully loaded Z for our 40th! There was also the option for AT7 instead of the MT6! In Canada we got the better version IMO! __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

06-21-2012, 01:37 PM	#9 (permalink)
Glasgow Smile Base Member Join Date: Feb 2010 Location: East Coast Posts: 27 Drives: Nissan Rep Power: 16	Just wanted to say thanks for this thread, walked outside at lunch with a screwdriver and switched them out in less than 10 min. Last edited by Glasgow Smile; 06-21-2012 at 01:44 PM.

06-25-2012, 01:21 PM	#10 (permalink)
shika805 Enthusiast Member Join Date: Sep 2011 Location: Santa Barbara, CA Posts: 491 Drives: 40th Z, 71' 240z Rep Power: 20	^did the same thing! Did in on my 15 min break from work. Just used a Philips screwdriver and it was a done deal thanks a lot!!!! Last edited by shika805; 06-25-2012 at 01:24 PM.

09-20-2012, 09:49 PM	#12 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	Sorry to hear about that BUT what prompted you to do that? You're probably the first to have done that Not a bad thing I was just curious __________________

09-21-2012, 10:57 AM	#13 (permalink)
Speedy Enthusiast Member Join Date: Jan 2012 Location: TN Posts: 390 Drives: check my signature Rep Power: 14	To reset air bag light. It pays to search this forum before going to the dealer. Flashing Airbag Light After HU Install NickTurnon likes this.

03-16-2012, 07:43 PM	#1 (permalink)
SAMSKEE Base Member Join Date: Dec 2011 Location: BAKERSFIELD,CA Posts: 22 Drives: silver 2011 370z Rep Power: 14	Had it installed in less than 10 minutes. Easy easy easy! Thanks to this writeup I saved a lot of my time. Thanks!!

03-20-2012, 09:00 AM	#2 (permalink)
CMills18 Base Member Join Date: Feb 2011 Location: Maryland Posts: 4 Drives: White 370Z Touring Rep Power: 15	Thanks for putting this up man it helped out a lot and didn't even take me that long to install at all.

03-29-2012, 03:46 PM	#3 (permalink)
omgZ Base Member Join Date: Sep 2010 Location: California Posts: 144 Drives: 10 370z 40th M6 Rep Power: 15	Thanks for the great write up.

03-29-2012, 03:51 PM	#4 (permalink)
omgZ Base Member Join Date: Sep 2010 Location: California Posts: 144 Drives: 10 370z 40th M6 Rep Power: 15	I just noticed that my stock button doesn't say "Engine"

04-25-2012, 05:14 AM	#6 (permalink)
FairladyZ Track Member Join Date: Jan 2009 Location: Los Angeles Posts: 850 Drives: 2012 370Z TRNG SPRT Rep Power: 18	I read through this whole thing but wanted to be sure before I start. I only have like 200 miles new car. Anyways for 6 speed where do I pry with my screw driver? I'm gonna wrap it with tape then pry at the silver bezel correct? But can someone give me a specific location on the bezel? Also do I remove the bezel below that one? The black one it sits on?

06-21-2012, 12:11 PM	#8 (permalink)
bonfire Base Member Join Date: Apr 2012 Location: Texas Posts: 37 Drives: '10 MB 7AT Sport Rep Power: 14	Finished mine last night. Literally took 5 min. I just popped the bezel off with my hands. I was worried I would break something as I was pulling on the bezel, but just as I thought it might be too much pressure it popped up....

07-04-2012, 08:45 PM	#11 (permalink)
tim_leary01 Base Member Join Date: Jun 2012 Location: Renton, WA Posts: 3 Drives: '12 370Z PW AT7 Rep Power: 14	Just did this mod today. I was freaked that I would snap/break some plastic taking everything apart but thanks to this thread it was super easy. I did it in 10 minutes before I ran some errands. Thanks!

09-21-2012, 03:58 PM	#14 (permalink)
mwhit02 Enthusiast Member Join Date: Sep 2012 Location: St. Louis Posts: 358 Drives: '15 Audi Allroad Rep Power: 13	unfortunately when installed my button the forums were down, hence i could no searching __________________ hi there!

11-16-2012, 03:13 PM	#15 (permalink)
billas 370z Base Member Join Date: Oct 2012 Location: Guam Posts: 50 Drives: 13 370Z Rep Power: 13	Just got my big red button together with the rear fog light in preparation for my Z's arrival. Good write up. Thanks. __________________ '13 370Z Arrived!!, '11 Juke, 03 Crew Cab, 98 SLK230, Agusta 312R, Duc 749S, Aquatrax Turbo

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ridiculous start/stop button question...	KillerBee370	Nissan 370Z General Discussions	53	07-26-2012 08:42 AM
Alternate Method for GTR Red Start-Stop Button Swap	Zmax	DIY Section (Do-It-Yourself)	9	03-24-2012 09:26 AM
[FOR SALE] GTR Start/Stop Button	chuckd05	Parts for sale (Private Classifieds)	17	09-13-2011 06:46 AM
GTR start stop button	Reaper42	Exterior & Interior	24	09-12-2010 01:09 AM
Start-Stop Button swap out	Minicobra1	Exterior & Interior	53	05-04-2010 03:19 AM