DIY: Oil Cooler Installation on a Nismo (Damper Included!) - vipor

Dustin@Z1 · 10-14-2011, 09:31 AM

Quote:

Originally Posted by MJB

I bought an oil kit for my Z from Z1, which comes with a Setrab cooler. I was thinking about mounting the cooler upside down, with the hose connections on the bottom. That way when I do an oil change I would just have to disconnect the hose fittings to drain the cooler. Does it matter what orientation the cooler is in? Whether connections are on top or bottom?

This has been debated a few times. I would like to discuss this with you whenever you have a few minutes if you would call me here at the shop.

There are a few drawbacks you need to be aware of FIRST before attempting to install the oil cooler core upside down.

Food for thought....the R35 GT-R has a factory installed oil cooler from Nissan. At no point in time does the VERY strict maintanence schedule call for removal and draining of the oil cooler core. The cores on the R35 are positioned with the fittings on TOP.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z NISMO Exhaust Installation Instructions	AK370Z	Nissan 370Z Owners Manual / Service Manuals	6	01-11-2012 07:48 AM
370z Nismo White, Pics included	mdbrich	New Nismo 370Z Owner	36	08-26-2010 02:03 AM
Oil cooler installation	sminky63	Nissan 370Z General Discussions	24	11-23-2009 07:58 PM
Oil Cooler Installation DIY Request.	spearfish25	DIY Section (Do-It-Yourself)	3	05-16-2009 02:58 PM