Alberta owners turbo interest?

Boosted Performance · 02-13-2012, 08:22 PM

Quote:

Originally Posted by O&G

I have my filter in the same location w/ no issues and GTM Stg. II s/c filter sits in same location. If you order the GTM Stg. II engine mount for the passenger side it will free up room to run piping forward to the bumper area or wherever you choose to locate the filter. I will be ordering the mount as soon as it becomes available on their website. I'm sure we could have fabed one up, but GTM has already done all the leg work making life easier.

Funny you mention engine mounts:

That is the prototype, and I have a built set waiting to go in my own car. Although these look like solid mounts (and they are) they are about 1/2" shorter than OEM. I plan on using a special, very hard rubber compound between the mount and engine sub frame. This will stiffen things up, yet keep the unwanted vibrations/noise to a minimum, because the rubber will act as a damper.

Like you said, it creates a ton of room when installed over the OEM mounts.

Quote:

Originally Posted by Ron

PS reservois for the 370Z? UAM is taking FOREVER to release theirs..

If I have the donor car long enough, I can look in to this, as well as a differential brace. All of these will be free of course for the donor car.

Zat_Zuma · 02-14-2012, 09:34 AM

Quote:

Originally Posted by Boosted Z

If I have the donor car long enough, I can look in to this, as well as a differential brace. All of these will be free of course for the donor car.

I just may volunteer my car for that brace

Plus I may have some aluminum bung intercooler welding and a header bung weld that will be need to be done, in the near future, if your interested

We will talk in the spring, as I have some concerns about the brace.

Boosted Performance · 02-14-2012, 10:47 AM

Quote:

Originally Posted by Zat_Zuma

I just may volunteer my car for that brace

Plus I may have some aluminum bung intercooler welding and a header bung weld that will be need to be done, in the near future, if your interested

We will talk in the spring, as I have some concerns about the brace.

Lloyd, just let me know when you are ready. I have a car lift on the way as well, but it should be ready for spring.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z Twin Turbo Owners?	GingaBreadMan	Forced Induction	28	01-19-2010 07:21 AM
September 19th Alberta G/Z meet	Sylvan Lake V	Canada	12	09-21-2009 06:07 PM
CF Roof Interest	SpawnAeroJohn	Exterior & Interior	33	08-24-2009 11:20 AM
July 4th Alberta meet	shumby	Canada	2	06-19-2009 11:58 AM
ATTENTION Alberta Buyers	Canadian370Z	Nissan 370Z Pricing / Ordering Discussions	29	03-06-2009 11:45 AM