01-15-2014, 07:55 PM
|
#1 (permalink)
|
|
A True Z Fanatic
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 70
Posts: 35,577
Drives: 2011 Nismo GM 6M
Rep Power: 2684440
|
Quote:
Originally Posted by fjpthree
this past weekend I decided to take a look at my brake pads. Got the wheel off and realized I could not visually see the pad, so I removed the "boot" that houses the pad. Once I got it apart, lost some brake fluid and realized this was not the best way to do this so I put it all back together and decided to leave it up to the professionals. Now the issue is that when I push on the brake pedal the pedal goes all the way to the floor. When I pump the brakes, I do get the pressure back, but only temporarily. The brakes are working, but something is not right. How can I get the brakes working normally? (I did check the brake fluid and it is full.)
|
Don't know what you mean be that. But it sounds like you got air in the system. And it needs bled.
|
|
|