![]() |
I'm going through the same research right now. I'll just share what I've found Coil overs- If you don't track your car, you're probably going to be fine with just
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#7 (permalink) |
|
A True Z Fanatic
Join Date: Aug 2013
Location: Romeoville, IL
Posts: 1,093
Drives: 2010 370z 40th
Rep Power: 3391 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
I'm going through the same research right now. I'll just share what I've found
Coil overs- If you don't track your car, you're probably going to be fine with just springs. They will do the job and lower the car an inch or two. For me, I'm not tracking the car. But, at the same time I kinda pride myself on doin things right and going above and beyond and getting more than I need for the car. I realize it's more than I need but I'm going with coil overs. As far as which ones.....that's subjective. I'm finding for people who just want to lower the car and have a good ride, Stance SS are one of the most popular. For more serious guys and track racers KW v3's. Height- I live in Chicagoland, so if I want to go lower than a couple inches I'll be scraping and having problems. So if I go lower than that, I'm going to look into air motion cups to raise it up when I drive Don't forget camber and toe! You'll need at least a rear camber kit, and depending on how low you go, you may need rear toe kit and front upper control arm. Last edited by Meulen; 12-13-2013 at 08:32 AM. |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| install new coilover question | cossie1600 | Brakes & Suspension | 4 | 12-12-2013 07:08 AM |
| Coilover Rear Adjustment question | chrischhorn | Brakes & Suspension | 0 | 02-25-2013 03:31 PM |
| KW Variant 3 Coilover question.... | scruffydog | Brakes & Suspension | 0 | 07-13-2012 04:48 PM |
| D2 Coilover question? | jappyjapz | Brakes & Suspension | 5 | 11-04-2011 06:27 PM |
| Coilover question?! | andrewkd16 | Brakes & Suspension | 5 | 08-10-2011 09:33 PM |