Eibach coils and Sways installed (2013)

Super Werty · 11-24-2013, 07:27 PM

I did the sways about 2 months ago and loved them and finally had time to do the coils. The Z feels complete now and I love it. Ride feels exactly like stock until you take a hard corner and it is completely flat and stable. Looks killer too!

Having never done suspension work on any vehicle before, I found the install to be very simple for all of the parts.

Front camber is -1.6 (actually maybe -1.4) and the rear is -1.8. I like it for now but I may take the rear to like -1.4 eventually. Front sway on stiffest(front-most hole) and middle on the rear bar. SPC camber arms were needed, but not the toe bolts

Also did the Z1 MAF tubes and AFE Pro dry S filters...my butt dyno says thank you

Next up I need exhaust and then some wheels! And then turbos!!!!

TerribleONE · 11-24-2013, 07:32 PM

Nice!

Z-Girl 12 · 11-24-2013, 07:35 PM

sexy set up...spacers or bigger wheels in the future?

Super Werty · 11-24-2013, 07:36 PM

Quote:

Originally Posted by Z-Girl 12

sexy set up...spacers or bigger wheels in the future?

bigger wheels hopefully in march/april I want those forgestar f14s

synolimit · 11-25-2013, 01:20 AM

So you have SPC rears and those numbers are from an alignment shop?

Super Werty · 11-25-2013, 01:17 PM

Quote:

Originally Posted by synolimit

So you have SPC rears and those numbers are from an alignment shop?

Yes. I had read originally on the forum that - 1.8 was ideal for the rear and then afterwards found out - 1.0 to - 1.4 was ideal for rear. do u have any suggestion? I can bring it back for free... Made friends with the manager at a shop

Leuz · 11-25-2013, 02:19 PM

Looks cool! I have been looking at those sways, happy to know they worked good for you

Rusty · 11-25-2013, 02:51 PM

Quote:

Originally Posted by Super Werty

Yes. I had read originally on the forum that - 1.8 was ideal for the rear and then afterwards found out - 1.0 to - 1.4 was ideal for rear. do u have any suggestion? I can bring it back for free... Made friends with the manager at a shop

Depends on what you want to do with it. DD, -1.0 to -1.4 think would be fine. Track, I have mine set to -1.7.

Jackson · 11-25-2013, 05:07 PM

Perfect entry level set up. Looks good!

Super Werty · 11-25-2013, 07:04 PM

Quote:

Originally Posted by Rusty

Depends on what you want to do with it. DD, -1.0 to -1.4 think would be fine. Track, I have mine set to -1.7.

well maybe I will leave it where it is then. it's not my daily driver and I dont know if I will track it yet, right now its just a very fun toy

Rusty · 11-25-2013, 09:51 PM

Quote:

Originally Posted by Super Werty

well maybe I will leave it where it is then. it's not my daily driver and I dont know if I will track it yet, right now its just a very fun toy

Once you get the bug. You're done. There is no 12 step program to help you stop.

Wonka2581 · 11-25-2013, 10:07 PM

Quote:

Originally Posted by Rusty

Once you get the bug. You're done. There is no 12 step program to help you stop.

God you are so right....

Gibby1113 · 11-25-2013, 10:20 PM

Sway bars look great. Do you them set up with the stock end links?

Super Werty · 11-25-2013, 10:58 PM

Quote:

Originally Posted by Gibby1113

Sway bars look great. Do you them set up with the stock end links?

yep stock endlinks for now...I wont upgrade until they break...or if I get bored

lol, well maybe I will track it...

Gibby1113 · 11-25-2013, 11:33 PM

Haha nice. Do they have a higher likelihood of breaking even if you were to track it once?

11-24-2013, 07:27 PM	#1 (permalink)
Super Werty Track Member Join Date: Jul 2013 Location: AZ Posts: 668 Drives: '13 Sport Rep Power: 14	Eibach coils and Sways installed (2013) I did the sways about 2 months ago and loved them and finally had time to do the coils. The Z feels complete now and I love it. Ride feels exactly like stock until you take a hard corner and it is completely flat and stable. Looks killer too! Having never done suspension work on any vehicle before, I found the install to be very simple for all of the parts. Front camber is -1.6 (actually maybe -1.4) and the rear is -1.8. I like it for now but I may take the rear to like -1.4 eventually. Front sway on stiffest(front-most hole) and middle on the rear bar. SPC camber arms were needed, but not the toe bolts Also did the Z1 MAF tubes and AFE Pro dry S filters...my butt dyno says thank you Next up I need exhaust and then some wheels! And then turbos!!!! __________________ The Build Last edited by Super Werty; 11-24-2013 at 07:30 PM.

11-24-2013, 07:32 PM	#2 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5852	Nice! __________________ 638WHP 541WTQ @ 13.5PSI Build thread

11-24-2013, 07:35 PM	#3 (permalink)
Z-Girl 12 A True Z Fanatic Join Date: Apr 2012 Location: Florida Posts: 4,105 Drives: Spirited Rep Power: 11718	sexy set up...spacers or bigger wheels in the future? __________________ 2012 Z-SOLD 2014 Nismo #565 Fast Intentions CBE/HFC/Swift/SPC/RJM/H&R-15/20mm/Z1 CAI/Headers/Intake Manifold w/Uprev Tune 328.31whp/263.64tq

11-25-2013, 01:20 AM	#5 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3391	So you have SPC rears and those numbers are from an alignment shop? __________________ 13 370z-

11-25-2013, 02:19 PM	#7 (permalink)
Leuz Track Member Join Date: Nov 2012 Location: NorCal Posts: 555 Drives: Bunny Rep Power: 15	Looks cool! I have been looking at those sways, happy to know they worked good for you __________________ 2013 PW 370Z Touring+Sport, NAV Tint 35% side, 18% back \| RJM clutch pedal \| ZSpeed SS lines \| Stillen Gen3 CAI \| Fast Intentions HFC and TDX 12'' CF CBE \| UpRev

11-25-2013, 05:07 PM	#9 (permalink)
Jackson Base Member Join Date: Jan 2012 Location: Redondo Beach Posts: 13 Drives: BMW E46 M3 Rep Power: 15	Perfect entry level set up. Looks good!

11-25-2013, 10:20 PM	#13 (permalink)
Gibby1113 Enthusiast Member Join Date: Nov 2012 Location: On open empty highways Posts: 366 Drives: 40th anniversary Rep Power: 14	Sway bars look great. Do you them set up with the stock end links? __________________ 40th anniversary #450/1000 \| Takeda Attack CAI \| Ark DTS exhaust \| to be continued...

11-25-2013, 11:33 PM	#15 (permalink)
Gibby1113 Enthusiast Member Join Date: Nov 2012 Location: On open empty highways Posts: 366 Drives: 40th anniversary Rep Power: 14	Haha nice. Do they have a higher likelihood of breaking even if you were to track it once? __________________ 40th anniversary #450/1000 \| Takeda Attack CAI \| Ark DTS exhaust \| to be continued...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Sold the Z. Time to sell all the goods. Meisters, sways, lips, coils, and more	Guppy	Parts for sale (Private Classifieds)	36	09-03-2013 10:06 AM
[FOR SALE] Eibach Front/Rear Sways	Namir	Parts for sale (Private Classifieds)	0	05-06-2013 12:50 PM
[WTB] Eibach or Hotchkis Sways	pfdaxe	Parts for sale (Private Classifieds)	3	02-08-2013 10:07 PM
Whiteline, Hotchkis, and Eibach Sways at WeSellCarParts!	WeSellCarPart	Suspension/Brakes	15	12-13-2011 10:45 PM
Whiteline, Hotchkis, and Eibach Sways at WeSellCarParts!	WeSellCarPart	Wesellcarparts	6	10-07-2011 05:30 PM