Nismo bumper brake duct install

DEpointfive0 · 06-14-2013, 11:58 PM

That made me slightly horny...
And chance a pebble will be thrown up and go as far as to ding the rotor/get caught between the pad?

Rusty · 06-15-2013, 05:36 AM

Quote:

Originally Posted by DEpointfive0

That made me slightly horny...
And chance a pebble will be thrown up and go as far as to ding the rotor/get caught between the pad?

That's a chance you take with any kit. Even the factory set-ups on other vehicles.

Interesting set-up.

God-Speed · 06-15-2013, 07:35 AM

This set up looks like ones that I have seen on a few Zo6 Corvettes. Look good!!! Very Nice.

gurneyeagle · 06-21-2013, 07:09 AM

Quote:

Originally Posted by DEpointfive0

That made me slightly horny...
And chance a pebble will be thrown up and go as far as to ding the rotor/get caught between the pad?

Quote:

Originally Posted by Dave s

It is always a possibility that a stone could get in but not a huge risk. If you were concerned you could run mesh in the hose as a safety measure.

Quote:

Originally Posted by Rusty

That's a chance you take with any kit. Even the factory set-ups on other vehicles.

Interesting set-up.

I just got my set of carbon fiber ducts like Rusty and I am going to try and make a screen cover to avoid the possibility of injesting a rock (for lack of a better term) in the duct.

Once I figure out the the what and the how, I'll post some pictures.

GREAT idea with the undertray though.

Dave s · 06-24-2013, 11:53 PM

this is a link to the ducts I used, they were the only ones I could find with a rearward facing outlet, the normal style will not work due to space issues.

I have not measured temps but will once I get setup and head to the track.

Revotec NACA Moulded Air Duct 2 Piece - Demon Tweeks

06-14-2013, 11:58 PM	#1 (permalink)
DEpointfive0 A True Z Fanatic Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17153	That made me slightly horny... And chance a pebble will be thrown up and go as far as to ding the rotor/get caught between the pad? __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - Brake Cooling Duct Installation	scruffydog	DIY Section (Do-It-Yourself)	31	04-18-2017 04:06 PM
DIY brake cooling duct	joo030879	DIY Section (Do-It-Yourself)	6	01-01-2014 07:55 AM
Brake Cooling Duct Idea - 2013 Front Bumper	Dystopia	Brakes & Suspension	7	10-31-2013 10:54 AM
Pretty cool brake duct setup for rotors (GTR)	SPOHN	Other Vehicles	7	12-26-2012 07:19 PM
Central 20 Brake Duct Kit	SoCal 370Z	Brakes & Suspension	16	05-06-2011 08:07 PM

06-15-2013, 07:35 AM	#3 (permalink)
God-Speed A True Z Fanatic Join Date: Sep 2010 Location: Austin, Tx. Posts: 4,367 Drives: Prototype Rep Power: 2684378	This set up looks like ones that I have seen on a few Zo6 Corvettes. Look good!!! Very Nice.

06-24-2013, 11:53 PM	#5 (permalink)
Dave s Base Member Join Date: Sep 2012 Location: Australis Posts: 36 Drives: 10 370z red at7 Rep Power: 14	this is a link to the ducts I used, they were the only ones I could find with a rearward facing outlet, the normal style will not work due to space issues. I have not measured temps but will once I get setup and head to the track. Revotec NACA Moulded Air Duct 2 Piece - Demon Tweeks