Which adhesive do you guys recommend for brake covers?

122554 · 05-04-2013, 08:08 PM

Didn't see you're in Houston. Go for it! You'll fit right in the hood!

b1adesofcha0s · 05-04-2013, 08:16 PM

Quote:

Originally Posted by StangerGT

ok ok... ill be informative... (constructive criticism right?)

The problem is its a cheap mod... and it looks it. Anyone who has a nice car does not use this chinsy plastic crap, they show off their properly colored calipers to the world for all to see.

if you go this route, you may have some autozone enthusiast give you praise at a car show, but others will just be laughing at your car from a far.

True story. I always laugh when I see a nice car with caliper covers at car meets. In fact, we did that just this morning

In the end it's your car and you can do with it whatever you like. I will say that if you plan on doing any tracking it would be a terrible idea. I completely burnt the paint on my calipers after my first track session at Summit Point.

Samjam1 · 05-04-2013, 08:26 PM

Lol everyone in the Houston area loves colored brake covers so I don't understand where all of this hate comes from but wow, it's surprising. I guess I just wasn't expecting this. Thanks for the ones that helped! I finally noticed how big of trolls some of you guys are hahaha but no hard feelings. Hope no one was offended.

StangerGT · 05-04-2013, 08:31 PM

Quote:

Originally Posted by Samjam1

Lol everyone in the Houston area loves colored brake covers so I don't understand where all of this hate comes from but wow, it's surprising. I guess I just wasn't expecting this. Thanks for the ones that helped! I finally noticed how big of trolls some of you guys are hahaha but no hard feelings. Hope no one was offended.

we... are being totally serious...

Zythaxus · 05-04-2013, 08:31 PM

If you want it go for it , they are meerly trying to convince you to do it right IE using the correct caliper paints/powdercoating that can withstand the heat of the brakes...a stick on will either melt...or fly off..and make a hazard/damage your car...its about the same as the other thread with hood scoops...but to each his own.

PS....a cover melting into your brakes could potentially cost you 3x as much as doing it the right way

122554 · 05-04-2013, 08:36 PM

Quote:

Originally Posted by Samjam1

Lol everyone in the Houston area loves colored brake covers so I don't understand where all of this hate comes from but wow, it's surprising. I guess I just wasn't expecting this. Thanks for the ones that helped! I finally noticed how big of trolls some of you guys are hahaha but no hard feelings. Hope no one was offended.

In Internet slang, a troll (pron.: /ˈtroʊl/, /ˈtrɒl/) is someone who posts inflammatory,[1] extraneous, or off-topic messages in an online community, such as a forum, chat room, or blog, with the primary intent of provoking readers into an emotional response[2] or of otherwise disrupting normal on-topic discussion.[3] The noun troll may also refer to the provocative message itself

MightyBobo · 05-04-2013, 08:37 PM

Quote:

Originally Posted by Samjam1

Lol everyone in the Houston area loves colored brake covers so I don't understand where all of this hate comes from but wow, it's surprising. I guess I just wasn't expecting this. Thanks for the ones that helped! I finally noticed how big of trolls some of you guys are hahaha but no hard feelings. Hope no one was offended.

The same people who like stick-on fender vents and chrome trim? Because people LOVE that stuff in Baltimore, so it must be the hottness!

We were just trying to help you NOT rice your nicer car out, but its your money. Rice away.

Also, you don't know what troll means, and you joined last month, so how can you "finally" ANYTHING concerning this board?

Samjam1 · 05-04-2013, 08:39 PM

Lol this strangergt guy is too much of a smartass. Relax dude it's not that serious.

But I mean how likely are they to melt? I bought high quality covers that we're guranteed not to melt. Obviously no guarantee is a guarantee but I don't take my car to tracks. It's just a daily driver that I'm working on as a visual project.

SPOHN · 05-04-2013, 08:41 PM

I'll just leave this here

Samjam1 · 05-04-2013, 08:42 PM

LOL but why are y'all getting so butthurt... Mightybooboo, you're just being rude. Just because I'm new doesn't mean you have to be disrespectful.

SouthArk370Z · 05-04-2013, 08:45 PM

Try this: https://duckduckgo.com/?q=high-temperature+adhesive
Should be something in there that will work.

StangerGT · 05-04-2013, 08:46 PM

Quote:

Originally Posted by Samjam1

Lol this strangergt guy is too much of a smartass. Relax dude it's not that serious.

But I mean how likely are they to melt? I bought high quality covers that we're guranteed not to melt. Obviously no guarantee is a guarantee but I don't take my car to tracks. It's just a daily driver that I'm working on as a visual project.

iknorite? Srsly... what is up with those mustang owners... they are all jerks...

Quote:

Originally Posted by MightyBobo

The same people who like stick-on fender vents and chrome trim? Because people LOVE that stuff in Baltimore, so it must be the hottness!

We were just trying to help you NOT rice your nicer car out, but its your money. Rice away.

Also, you don't know what troll means, and you joined last month, so how can you "finally" ANYTHING concerning this board?

this guys know what hes talking about...

StangerGT · 05-04-2013, 08:48 PM

Quote:

Originally Posted by Samjam1

LOL but why are y'all getting so butthurt... Mightybooboo, you're just being rude. Just because I'm new doesn't mean you have to be disrespectful.

yeah bobo... ya jerk...

gomer_110 · 05-04-2013, 08:50 PM

Zythaxus · 05-04-2013, 08:50 PM

what kinda covers ya get..linky to where ya got em

05-04-2013, 08:08 PM	#16 (permalink)
122554 Track Member Join Date: Jan 2013 Location: My own world Posts: 506 Drives: 2010 Nismo Rep Power: 13	Didn't see you're in Houston. Go for it! You'll fit right in the hood! __________________ I don't normally drink beer, but when I do....i drink a lot!

05-04-2013, 08:31 PM	#20 (permalink)
Zythaxus Base Member Join Date: Feb 2013 Location: Marietta, GA Posts: 82 Drives: 2010 370z BS 7AT Rep Power: 12	If you want it go for it , they are meerly trying to convince you to do it right IE using the correct caliper paints/powdercoating that can withstand the heat of the brakes...a stick on will either melt...or fly off..and make a hazard/damage your car...its about the same as the other thread with hood scoops...but to each his own. PS....a cover melting into your brakes could potentially cost you 3x as much as doing it the right way b1adesofcha0s and StangerGT like this. __________________ "Vision" 2010 Brilliant silver 370Z Touring/sport Stillen G3 \| Z1 25 Row \| Hotchkis Sways \| Swift Spec R \| 20F/25R

05-04-2013, 08:39 PM	#23 (permalink)
Samjam1 Base Member Join Date: Apr 2013 Location: Houston Posts: 24 Drives: 2009-370Z-Black-Auto Rep Power: 12	Lol this strangergt guy is too much of a smartass. Relax dude it's not that serious. But I mean how likely are they to melt? I bought high quality covers that we're guranteed not to melt. Obviously no guarantee is a guarantee but I don't take my car to tracks. It's just a daily driver that I'm working on as a visual project. StangerGT likes this.

05-04-2013, 08:41 PM	#24 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I'll just leave this here b1adesofcha0s likes this. __________________

05-04-2013, 08:42 PM	#25 (permalink)
Samjam1 Base Member Join Date: Apr 2013 Location: Houston Posts: 24 Drives: 2009-370Z-Black-Auto Rep Power: 12	LOL but why are y'all getting so butthurt... Mightybooboo, you're just being rude. Just because I'm new doesn't mean you have to be disrespectful. StangerGT likes this.

05-04-2013, 08:26 PM	#18 (permalink)
Samjam1 Base Member Join Date: Apr 2013 Location: Houston Posts: 24 Drives: 2009-370Z-Black-Auto Rep Power: 12	Lol everyone in the Houston area loves colored brake covers so I don't understand where all of this hate comes from but wow, it's surprising. I guess I just wasn't expecting this. Thanks for the ones that helped! I finally noticed how big of trolls some of you guys are hahaha but no hard feelings. Hope no one was offended.

05-04-2013, 08:45 PM	#26 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	Try this: https://duckduckgo.com/?q=high-temperature+adhesive Should be something in there that will work. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

05-04-2013, 08:50 PM	#29 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36940	StangerGT likes this. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

05-04-2013, 08:50 PM	#30 (permalink)
Zythaxus Base Member Join Date: Feb 2013 Location: Marietta, GA Posts: 82 Drives: 2010 370z BS 7AT Rep Power: 12	what kinda covers ya get..linky to where ya got em __________________ "Vision" 2010 Brilliant silver 370Z Touring/sport Stillen G3 \| Z1 25 Row \| Hotchkis Sways \| Swift Spec R \| 20F/25R

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What DRL Do You Recommend?	gy954	Exterior & Interior	3	03-26-2012 04:35 PM
Has anyone tried the 3m emblem adhesive?	Methodical4u	Exterior & Interior	2	06-20-2011 05:18 PM
do you guys recommend a rear camber kit when installing Eibach springs?	ryanboy	Brakes & Suspension	9	04-05-2011 11:46 PM
Removing radiator, battery and brake fuild covers	Nismo221	Exterior & Interior	1	11-22-2010 02:34 PM
Splash Guard Adhesive	Jaws12	Nissan 370Z General Discussions	1	07-15-2009 10:34 PM