Swift Springs-- Nismo Review!!

cdoxp800 · 02-08-2011, 03:45 PM

Quote:

Originally Posted by JJ-NISMO

cdox, I measured the front before and after the drop. Check out the picks below. After the drop the middle section of the front is sitting at 5.5 inches from the under guard and 6 inches at the paint. The side portion of the front fender is sitting a 4 inches from the under guard and 4.75 inches from the paint.

If a Nismo and a standard 370z were dropped to the same height, I think the Nismo will still have more clearance issues due to the longer nose.

Thanks. That kind of helps, but I was really looking for the wheel well/Fender to the Ground on the side with the wheel.
I have the swift springs, but stating the think it's going to be a bit to low for me. If you would not mind taking a few shot of the front and rear measured from the ground to the to the side fender/wheel well just about the wheel it's self.

Thanks,

C

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift springs review!!!!!	CFZ	Brakes & Suspension	2166	09-10-2020 01:58 AM
H&R or Swift Springs?	ZPhycho	Brakes & Suspension	130	07-01-2013 06:25 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 10:46 AM
Swift - Sport Springs	370Ztune	Suspension/Brakes	14	02-03-2011 06:51 PM
SWIFT Springs in Production	wishihadnav	Brakes & Suspension	200	02-01-2011 02:34 PM