Coilover Adjustments for height and Pre-tension

Scott @ RA · 04-23-2010, 10:09 PM

abakja1,
Sorry to hear about what you are going through... both KW and the distributor should have been in better communication to you about all this.

NewYorkJon34,
Not only should the springs be different between the G37 and the 370Z coilover kit, the shock bodies should be different too (longer). The G37 is a bigger car and its suspension mounting points are a bit higher off the ground thus it will require a longer shock body than the 370Z to be right.
At least that is how most quality coilovers do it. I am sure that the G37 coilovers will physically bolt on the the 370Z, but it might sit higher and be out of the height adjustment range it was designed for.

Good luck to you both

04-23-2010, 10:09 PM	#23 (permalink)
Scott @ RA Enthusiast Member Join Date: Feb 2010 Location: So Cal Posts: 410 Drives: Ridiculously Fast Rep Power: 17	abakja1, Sorry to hear about what you are going through... both KW and the distributor should have been in better communication to you about all this. NewYorkJon34, Not only should the springs be different between the G37 and the 370Z coilover kit, the shock bodies should be different too (longer). The G37 is a bigger car and its suspension mounting points are a bit higher off the ground thus it will require a longer shock body than the 370Z to be right. At least that is how most quality coilovers do it. I am sure that the G37 coilovers will physically bolt on the the 370Z, but it might sit higher and be out of the height adjustment range it was designed for. Good luck to you both Last edited by Scott @ RA; 04-28-2010 at 12:17 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Suspension adjustments and how they affect handling	M.Bonanni	Brakes & Suspension	66	01-16-2025 05:47 PM
Car Function Adjustments Available Only with Nav?	SoCal 370Z	Audio & Video	17	01-25-2011 04:25 PM
aftermarket seats / height	konsol	Nissan 370Z General Discussions	2	02-11-2010 09:37 AM
Seat height adjustment keeps rolling down...	MeetJoeAsian	Exterior & Interior	2	10-20-2009 11:17 AM