How to get major negative camber?

Rusty · 04-14-2021, 09:39 PM

Damn! You guys were nice to him. I thought that when I came back. He would be a piece of burnt toast.

Not many here are into stance. The most camber guys run here is around -3. And that's for track use. We got guys here running 315's on a square set-up. I have 345's on the rear.

DaveZ03 · 04-15-2021, 08:18 AM

Quote:

Originally Posted by Rusty

Damn! You guys were nice to him. I thought that when I came back. He would be a piece of burnt toast.

Agreed. I saw the amount of replies and was getting ready for some free entertainment, scrolled to see your reply up top and then continued and became both disappointed and confused. Maybe the forum is becoming softer?

Brendan · 04-15-2021, 08:46 AM

Most off the shelf arms will only get you -5 or -6 at most. You're going to have to modify or build something to get double digit, maybe even modify or replace the knuckles and lower control arms. I'm kinda curious to see what -11 would look like. I'm at -4 on my autocross car and even normal people can tell it's a lot.

Tyler_vq37 · 04-15-2021, 08:21 PM

Quote:

Originally Posted by Brendan

Most off the shelf arms will only get you -5 or -6 at most. You're going to have to modify or build something to get double digit, maybe even modify or replace the knuckles and lower control arms. I'm kinda curious to see what -11 would look like. I'm at -4 on my autocross car and even normal people can tell it's a lot.

Yeah, I was afraid I might have to have maybe someone slot camber arms. I would hope I don't run into much trouble with the knuckles, but I will see. The clearances may force me to buy new ones.

Ghostvette · 04-15-2021, 08:48 AM

Quote:

Originally Posted by Rusty

Damn! You guys were nice to him. I thought that when I came back. He would be a piece of burnt toast.

Quote:

Originally Posted by DaveZ03

Agreed. I saw the amount of replies and was getting ready for some free entertainment, scrolled to see your reply up top and then continued and became both disappointed and confused. Maybe the forum is becoming softer?

Nah, most of the folks that would burn him down aren't on near as much. However, it does give me one more to add to the iggy list. Why would you want to do something so stupid as to 'stance' a Z?

It is not safe and it looks goofy as hell.

Tyler_vq37 · 04-15-2021, 08:29 PM

Quote:

Originally Posted by Rusty

Damn! You guys were nice to him. I thought that when I came back. He would be a piece of burnt toast.

Not many here are into stance. The most camber guys run here is around -3. And that's for track use. We got guys here running 315's on a square set-up. I have 345's on the rear.

Before I posted anything, I was very afraid I would get pounced on by a bunch of people because I new nobody stances out 370z's. I've always been about being unique and this is a major instance of that. I appreciate how people have built them, but the stance world has really grown on me. This is my first vehicle in my name, that I bought and is the vehicle that I happen to have as I change my taste in modifications.

Brendan · 04-15-2021, 10:22 PM

Quote:

Originally Posted by Tyler_vq37

Before I posted anything, I was very afraid I would get pounced on by a bunch of people because I new nobody stances out 370z's. I've always been about being unique and this is a major instance of that. I appreciate how people have built them, but the stance world has really grown on me. This is my first vehicle in my name, that I bought and is the vehicle that I happen to have as I change my taste in modifications.

I feel like all I see are stance z34 on ig

NorthStyle · 04-16-2021, 08:53 AM

Quote:

Originally Posted by Brendan

I feel like all I see are stance z34 on ig

I feel like the majority of them are.

Rusty · 04-15-2021, 10:54 PM

Quote:

Originally Posted by Tyler_vq37

Before I posted anything, I was very afraid I would get pounced on by a bunch of people because I new nobody stances out 370z's. I've always been about being unique and this is a major instance of that. I appreciate how people have built them, but the stance world has really grown on me. This is my first vehicle in my name, that I bought and is the vehicle that I happen to have as I change my taste in modifications.

You want to check out VooDoo for some suspensions bits. They have upper and lower arms. But they're more into drifting.

Jhill · 04-15-2021, 10:16 PM

Quote:

Originally Posted by Rusty

Damn! You guys were nice to him. I thought that when I came back. He would be a piece of burnt toast.

Not many here are into stance. The most camber guys run here is around -3. And that's for track use. We got guys here running 315's on a square set-up. I have 345's on the rear.

Maybe they’re all waiting till next month when he post a question of why he has so much inside tire wear.

dts3 · 04-17-2021, 09:39 PM

Quote:

Originally Posted by Rusty

Damn! You guys were nice to him. I thought that when I came back. He would be a piece of burnt toast.

Not many here are into stance. The most camber guys run here is around -3. And that's for track use. We got guys here running 315's on a square set-up. I have 345's on the rear.

They just sent him to a very toxic FB group lol. He'll get it from them.

04-14-2021, 09:39 PM	#1 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,571 Drives: 2011 Nismo GM 6M Rep Power: 2684440	Damn! You guys were nice to him. I thought that when I came back. He would be a piece of burnt toast. Not many here are into stance. The most camber guys run here is around -3. And that's for track use. We got guys here running 315's on a square set-up. I have 345's on the rear. Brendan, Ghostvette, sx moneypit and 2 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-15-2021, 08:46 AM	#3 (permalink)
Brendan Track Member Join Date: Apr 2013 Location: Colorado Posts: 646 Drives: Poor man's Porsche Rep Power: 544	Most off the shelf arms will only get you -5 or -6 at most. You're going to have to modify or build something to get double digit, maybe even modify or replace the knuckles and lower control arms. I'm kinda curious to see what -11 would look like. I'm at -4 on my autocross car and even normal people can tell it's a lot. Rusty likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any harm running negative camber long term ?	dkinghl	Nissan 370Z General Discussions	13	09-21-2016 09:06 PM
Negative Camber	Lukcas61	Brakes & Suspension	12	07-05-2015 12:52 PM
Decreasing Negative Camber?	tylerk	Brakes & Suspension	11	12-22-2012 02:24 PM
stock suspension negative rear camber?	JAYNO20	Brakes & Suspension	14	05-15-2012 09:31 PM
TopSecret Lip l Slammed l 5" lips l Negative Camber	SOLISIMO	The Lounge (Off Topic)	14	07-09-2009 01:06 PM