How to get major negative camber?

Tyler_vq37 · 04-14-2021, 12:49 PM

Hello, I have plans to stance out my 370z and am having trouble finding camber arms that allow a lot of camber. Is there any way to get the camber I want? I was looking at Voodoo 13 camber arms front and rear, but they allow for a max of -9 degrees of camber.

Rusty · 04-14-2021, 03:50 PM

This is going to get interesting.

NorthStyle · 04-14-2021, 04:29 PM

Quote:

Originally Posted by Tyler_vq37

Hello, I have plans to stance out my 370z and am having trouble finding camber arms that allow a lot of camber. Is there any way to get the camber I want? I was looking at Voodoo 13 camber arms front and rear, but they allow for a max of -9 degrees of camber.

Exactly how much camber are you trying to run, and for what reason? Our cars can fit some pretty ridiculously sized setups so long as you don't mind a decent amount of camber (I'm thinking in the -5 to -6 range), stretched tires and rolling/pulling your fenders.

zeeder · 04-14-2021, 04:43 PM

Quote:

Originally Posted by NorthStyle

Exactly how much camber are you trying to run, and for what reason? Our cars can fit some pretty ridiculously sized setups so long as you don't mind a decent amount of camber (I'm thinking in the -5 to -6 range), stretched tires and rolling/pulling your fenders.

Something like this?!

camber.jpg

Tyler_vq37 · 04-14-2021, 05:08 PM

I am hoping for more of a 12 to 15 degree negative camber setup

redondoaveb · 04-14-2021, 05:39 PM

Quote:

Originally Posted by Tyler_vq37

I am hoping for more of a 12 to 15 degree negative camber setup

You're not going to get much help with what you're trying to achieve from the forum. Most of the guys on here are doing performance builds and are running a lot less camber than what you're looking at doing. Honestly, you would probably get more information from Facebook.

Tyler_vq37 · 04-14-2021, 06:00 PM

Quote:

Originally Posted by redondoaveb

You're not going to get much help with what you're trying to achieve from the forum. Most of the guys on here are doing performance builds and are running a lot less camber than what you're looking at doing. Honestly, you would probably get more information from Facebook.

Do you know of any really good pages to follow for stancing on Facebook? I have a few that I already follow, but most of them dont have z's.

redondoaveb · 04-14-2021, 06:14 PM

Quote:

Originally Posted by Tyler_vq37

Do you know of any really good pages to follow for stancing on Facebook? I have a few that I already follow, but most of them dont have z's.

I don't but you might join this group (it has 36k members) and post your question(s) on there

https://www.facebook.com/groups/3940...297/?ref=share

wanker · 04-14-2021, 05:27 PM

https://www.motor1.com/news/29898/ex...wilders-video/

I am neither amused or bewildered. Just sad that you would do this to something other than a Civic.

Tyler_vq37 · 04-14-2021, 06:02 PM

Quote:

Originally Posted by wanker

https://www.motor1.com/news/29898/ex...wilders-video/

I am neither amused or bewildered. Just sad that you would do this to something other than a Civic.

I get it, I was never really into it, but everyone who owns a 370z doesn't stance with major negative camber. I want to be very unique and in doing so, it is become appearent of the difficulty level for research. It's basically trial and error as of current.

JARblue · 04-16-2021, 10:15 AM

Quote:

Originally Posted by Tyler_vq37

I want to be very unique

Stance is not unique. It is dumb and unsafe. You want to be like a bunch of other idiots and disrespect your vehicle? Go for it - it's yours after all. But don't pretend like your doing something special because you're not

-ZS-Carpenter · 04-17-2021, 07:41 PM

Quote:

Originally Posted by JARblue

Stance is not unique. It is dumb and unsafe. You want to be like a bunch of other idiots and disrespect your vehicle? Go for it - it's yours after all. But don't pretend like your doing something special because you're not

He means unique as in doing the exact same dumb chit he's seen 1000 times on fakebook or chitstagram. He is special as in a should wear a helmet kinda special.

His chitbox will be on r/shittycarmods in 6 months if he doesn't wreck it or run out of Biden bucks before then

Sent from my SM-G965U using Tapatalk

Dreadnaught · 04-17-2021, 07:55 PM

I'm hoping this is just a prank.

OptionZero · 04-15-2021, 09:39 AM

You will probably need more than FUCAS and need lower arms with length adjustment

Like T-demand:
https://www.topendmotorsports.com/ni...able-10579.php

Also send a message to dedpedal on instagram

geeteezee · 04-16-2021, 02:29 PM

Well, that took longer than expected.

04-14-2021, 12:49 PM	#1 (permalink)
Tyler_vq37 Base Member Join Date: Nov 2020 Location: California Posts: 7 Drives: 2017 manual 370z Rep Power: 6	How to get major negative camber? Hello, I have plans to stance out my 370z and am having trouble finding camber arms that allow a lot of camber. Is there any way to get the camber I want? I was looking at Voodoo 13 camber arms front and rear, but they allow for a max of -9 degrees of camber.

04-14-2021, 03:50 PM	#2 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,571 Drives: 2011 Nismo GM 6M Rep Power: 2684440	This is going to get interesting. Trips, BGTV8, 2011 Nismo#91 and 13 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-14-2021, 05:27 PM	#9 (permalink)
wanker Enthusiast Member Join Date: Apr 2014 Location: San Diego Posts: 443 Drives: 2011 370Z S/T A7 Rep Power: 2903	https://www.motor1.com/news/29898/ex...wilders-video/ I am neither amused or bewildered. Just sad that you would do this to something other than a Civic. gomer_110, -ZS-Carpenter and DieselKrampus like this.

04-17-2021, 07:55 PM	#13 (permalink)
Dreadnaught Track Member Join Date: Dec 2009 Location: Farmington, Utah Posts: 582 Drives: 14 SR 370z 6MT Rep Power: 10141	I'm hoping this is just a prank. Rusty likes this. __________________ Ford Diesel and Heavy Line Technician at your service.

04-15-2021, 09:39 AM	#14 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,270 Drives: 15 370Z Nismo 6MT Rep Power: 214102	You will probably need more than FUCAS and need lower arms with length adjustment Like T-demand: https://www.topendmotorsports.com/ni...able-10579.php Also send a message to dedpedal on instagram __________________ OptionZero Build Thread

04-14-2021, 05:08 PM	#5 (permalink)
Tyler_vq37 Base Member Join Date: Nov 2020 Location: California Posts: 7 Drives: 2017 manual 370z Rep Power: 6	I am hoping for more of a 12 to 15 degree negative camber setup

04-16-2021, 02:29 PM	#15 (permalink)
geeteezee Base Member Join Date: Jun 2019 Location: Ontario Posts: 191 Drives: 19 370z Heritage EAC Rep Power: 3362	Well, that took longer than expected. Optimiser and Brendan like this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any harm running negative camber long term ?	dkinghl	Nissan 370Z General Discussions	13	09-21-2016 09:06 PM
Negative Camber	Lukcas61	Brakes & Suspension	12	07-05-2015 12:52 PM
Decreasing Negative Camber?	tylerk	Brakes & Suspension	11	12-22-2012 02:24 PM
stock suspension negative rear camber?	JAYNO20	Brakes & Suspension	14	05-15-2012 09:31 PM
TopSecret Lip l Slammed l 5" lips l Negative Camber	SOLISIMO	The Lounge (Off Topic)	14	07-09-2009 01:06 PM