Voodoo 13 rear camber arms?

Joon

Hello,

Did some research and there seem not to be barely any review on Voodoo 13 new rear camber arm. Anyone who has it, can you chime in on your experience with it? I understand most run SPL, but if the voodoo one is just as good for a DD then I rather spend that extra buck on the alignment.

Thanks

https://274048-850599-raikfcquaxqnco...NS-0301-HC.jpg

Attached Images

RCNS-0301-HC.jpg (33.8 KB, 12 views)

Quicksilvers

On this wonderful forum you will find a lot of people here are on the SPL bandwagon they do make quality suspension parts as well. I have ran the Voodoo 13 rear camber arms for many years on my Z. I actually choose to run these rear camber arms after I seen one of the fastest Z I have seen at one of the tracks I run at was using these rear camber arms. In my experience the Voodoo 13 rear camber arms are excellent quality arms and will work on the street or track. I was able to achieve proper alignment on my Z with the Voodoo 13 rear chamber arms. Also the Voodoo 13 rear chamber arms hold there adjustment too just like the SPL rear chamber arms your alignment technician will thank you. What springs or coilovers are you running on your Z?

__________________
Mr. Clean

Joon

I’m currently lowered on swift spring and yea, my voodoo 13 rear camber arm just arrived, looks pretty solid, I was a little skeptical since everyone’s on SPL. but it’s reassuring to know your exp with it.

Rusty

The VooDoo parts came out a few years ago. The SPL parts at the time was well established. They don't break. Think given time. You will see more VooDoo parts. They're slowly catching on.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

g96818

I like it. I'm using voodoo for my front and rear arms. Cheaper than SPL and same spherical bearings.

__________________
CZP are lying thieves!

k67p67

IMO, the Voodoo13 suspension arms are every bit as good as the SPL arms, especially for non-track usage. My alignment tech did say that he has a slight preference for the adjustment locking design of the SPL arms but wouldn't necessarily spend extra for it. I run their FUCAs and am very satisfied.

__________________
2017 370Z Nismo Tech 6MT
Work | Motordyne | Powertrix | Swift | Michelin | Takeda | Hotchkis | RJM | Voodoo13 | SPL | SPC | Z1 Motorsports | ZSpeed | Morimoto | Craft Square | Hawk Performance | Kanjo Spec.D | Raceseng

SeeThruHead

Forsberg runs vodoo or at least did at one point. So unless he quietly switched them out for something else I would say they are probably great.

__________________
My Build thread STH Build Plan Thread
Images too big fix here