Nissan 370Z Forum  

Coilovers for a weekend car

Hello all I have a few decisions to make that maybe some of you can help guide me on. So far for my suspension upgrades the parts I've purchased are

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Brakes & Suspension


Like Tree9Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 09-30-2019, 12:31 PM   #1 (permalink)
Base Member
 
Join Date: Feb 2012
Location: Savannah
Posts: 113
Drives: 14 MBMM6S
Rep Power: 3368
hrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond repute
Default Coilovers for a weekend car

Hello all

I have a few decisions to make that maybe some of you can help guide me on.

So far for my suspension upgrades the parts I've purchased are

Swift Springs (decided not to use)
SPL Camber arms
SPC toe bolts
20mm spacers (decided not to use)

At first I thought this was all I wanted/needed to have a decent fitment for some used factory Nismo wheels.

I ended up going quite a bit further and decided I want to cry once. So I bought...

Forgestar wheels 19x9.5+20 wrapped in 245/40/19 and 19x11+17 in 285/35/19
and the Z1 Brake kit upgrade since It's time for brakes.

Now I don't do any track driving nor do I plan to do anything more than autocross.Most of my driving is cruising back country roads or the Interstate. So I do value comfort as I typically cruise for 1-3 hours at a time. It's not a daily though.

I decided I want to get coilovers instead and install everything together and be done. So that brought me to Fortune Auto. After reading on the divorced style vs true I decided I want to get the OEM style because I didn't think I'd get much benefit from doing midlinks. Fortune auto offers a bunch of options on this coilover and everything I've read on the forums has started to somewhat run together and I ended up more confused. Now my actual questions.

Fortune Auto 500 Series Coilovers for Nissan 370z (OEM Rear) - Fortune Auto SuperStore by Enjuku Racing Parts, LLC

Should I get the swift spring upgrade or can I use my swift springs and get the correct valved shocks as long as the diameter is the same? I have no problem just selling my swifts and buying them already with the coilovers if that's the best route.

Do I need the radial mount upgrades? I've read it reduces some noise during the coilover operation. This is something I'm willing to pay extra for if it's needed/worth it.

Do I need the adjustment extender?

Or should I consider looking at a different coilover all together?

I know this is a lot. Any help is appreciated.
hrtbrknprince is offline   Reply With Quote
Old 09-30-2019, 01:28 PM   #2 (permalink)
A True Z Fanatic
 
Join Date: Apr 2011
Location: Sacramento
Posts: 3,157
Drives: 15 370Z Nismo 6MT
Rep Power: 203225
OptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond repute
Default

I don't know what swift springs you bought, but they're probably the Spec-Rs meant for fixed struts

If you are getting Fortunes, you want the swifts they provide as they are the correct length for their coilovers.

I think the radial mounts only apply to the fronts. The divorced setup in the back requires something different; fortunately, swift has the solution:

Swift thrust washers available from SPL
https://www.splparts.com/products/sw...t-washers.html

They are basically thin plastic rings that go between the spring and the mounting surfaces so they can rotate with less friction. this is what creates the "squeaking" and "popping" sound that occurs with coilovers during compression. One set should handle the rears fine. They are insanely easy to install, you're just putting one set on top of the spring and one set on the bottom. The radial mounts are just a fancier solution for the fronts.

you might as well get the adjustment extender to make life easiest in the future, even if you aren't doing a ton of adjusting

Stick with the fortunes. They are USA-rebuildable, offer great support, and very functional. I use them on my daily IS300 and the ride is excellent; others use them here for track and are satisfied.

As for your wheels - they are a fairly common size range and should fit fine without further work, with the caveat that you don't go too low. If you are too low your alignment will start getting out of whack and you will need more SPL parts to correct them. I don't think the fender clearance will necessarily be the issue, it's mostly sorting out side-to-side to make sure it's even and to zero out your toe for tire wear.

You'r eon the right path, just dont get intimidated by options presented.
hrtbrknprince and BettyZ like this.
__________________
OptionZero Build Thread
OptionZero is online now   Reply With Quote
Old 09-30-2019, 01:59 PM   #3 (permalink)
Base Member
 
Join Date: Feb 2019
Location: Kentucky
Posts: 194
Drives: '11 FairladyZ
Rep Power: 48203
DaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond repute
Default

I actually went with these (divorced/OEM type set up):
https://www.dsgperformance.com/dsg-s...34-nissan-370z

Extremely happy with them, install was a breeze and there are no weird noises due to the radial bearings and the washers that were included. I went with custom spring rates, 13f/11r. SPL FUCA and Rear Camber arms got everything in line, since I didn't slam it. My Z is a weekend car only and again, I'm EXTREMELY happy with this set up as, in my opinion, improved what was already there. Better turn in, feels planted/solid, and lowered the car. Hit up Josh@DSG, he will take care of you. Hope this helps!
DaveZ03 is offline   Reply With Quote
Old 09-30-2019, 05:16 PM   #4 (permalink)
A True Z Fanatic
 
Join Date: Apr 2011
Location: Sacramento
Posts: 3,157
Drives: 15 370Z Nismo 6MT
Rep Power: 203225
OptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond repute
Default

FYI - DSG are recolored/relabeled Fortune Auto coilovers.

They may also have some custom spring rate/damper specifications, but i dunno how much testing they do to determine them

Fortunes are also sourced from. . .places in common with other brands, but thats not necessarily a negative
__________________
OptionZero Build Thread
OptionZero is online now   Reply With Quote
Old 09-30-2019, 05:21 PM   #5 (permalink)
Base Member
 
Join Date: Feb 2019
Location: Kentucky
Posts: 194
Drives: '11 FairladyZ
Rep Power: 48203
DaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond reputeDaveZ03 has a reputation beyond repute
Default

Quote:
Originally Posted by OptionZero View Post
FYI - DSG are recolored/relabeled Fortune Auto coilovers.

They may also have some custom spring rate/damper specifications, but i dunno how much testing they do to determine them

Fortunes are also sourced from. . .places in common with other brands, but thats not necessarily a negative


These are fortune 500s. Just DSGs special edition. Came with build and dyno sheets.


Sent from my iPhone using Tapatalk
hrtbrknprince likes this.
DaveZ03 is offline   Reply With Quote
Old 09-30-2019, 05:26 PM   #6 (permalink)
Base Member
 
Join Date: Oct 2013
Location: OK
Posts: 178
Drives: '09 370Z Sport
Rep Power: 9971
tRidiot has a reputation beyond reputetRidiot has a reputation beyond reputetRidiot has a reputation beyond reputetRidiot has a reputation beyond reputetRidiot has a reputation beyond reputetRidiot has a reputation beyond reputetRidiot has a reputation beyond reputetRidiot has a reputation beyond reputetRidiot has a reputation beyond reputetRidiot has a reputation beyond reputetRidiot has a reputation beyond repute
Default

Is that what that sound is??? I get a weird squeak/rub noise. I had it some with my stock shocks and thought it meant they needed replacement. I was getting kind of a skipping or skittering sideways over bumps, too, so that made me think my stocks were bad. Now, if anything, after putting on a used set of KW V1, the noise is worse. Seems to be much more out of the rear, but could be getting some from the front.
tRidiot is offline   Reply With Quote
Old 09-30-2019, 06:00 PM   #7 (permalink)
A True Z Fanatic
 
Join Date: Apr 2011
Location: Sacramento
Posts: 3,157
Drives: 15 370Z Nismo 6MT
Rep Power: 203225
OptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond repute
Default

If the noise occurs during compression and sounds like a squeak, sometimes a sharp pop, that is the springs "binding" against metal.

The best i can explain it: when a spring is compressed down, the top and bottom rotate. thats physically the coiling/uncoiling of the spring. Well, what are the top and bottom touching? The upper mount and lower seat. All that stuff is metal. So you have metal moving against metal, which creates noise.

The radial bearing eliminates the noise by putting that mounting surface on a rotating platform with low friction. The thrust washer does the same thing - it's just two plastic (or i think one plastic and one metal) ring that goes between the spring and the mounting surface, so that rotation has less friction and therefore less noise.

The radial bearing is a sophisticated (and more expensive) solution.
The thrust washers are a cheap and just as practically effective solution.

I have used the swift washers on three cars (S14, IS300, Z34) and it has solved the spring popping noise every time.
ValidusVentus and BettyZ like this.
__________________
OptionZero Build Thread
OptionZero is online now   Reply With Quote
Old 09-30-2019, 08:25 PM   #8 (permalink)
Base Member
 
Join Date: Feb 2012
Location: Savannah
Posts: 113
Drives: 14 MBMM6S
Rep Power: 3368
hrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond repute
Default

Thank you Option for the advice. I will stick with Fortune auto and get those thrust washers and radial mounts.

I did forget to mention spring rates. 12k/11k sound like a good compromise or would you get something lower or higher?
hrtbrknprince is offline   Reply With Quote
Old 09-30-2019, 08:49 PM   #9 (permalink)
A True Z Fanatic
 
Join Date: Aug 2018
Location: Chicagoland
Age: 37
Posts: 5,261
Drives: A Garage Queen
Rep Power: 2684370
BettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond repute
Default

Quote:
Originally Posted by OptionZero View Post
If the noise occurs during compression and sounds like a squeak, sometimes a sharp pop, that is the springs "binding" against metal.

The best i can explain it: when a spring is compressed down, the top and bottom rotate. thats physically the coiling/uncoiling of the spring. Well, what are the top and bottom touching? The upper mount and lower seat. All that stuff is metal. So you have metal moving against metal, which creates noise.

The radial bearing eliminates the noise by putting that mounting surface on a rotating platform with low friction. The thrust washer does the same thing - it's just two plastic (or i think one plastic and one metal) ring that goes between the spring and the mounting surface, so that rotation has less friction and therefore less noise.

The radial bearing is a sophisticated (and more expensive) solution.
The thrust washers are a cheap and just as practically effective solution.

I have used the swift washers on three cars (S14, IS300, Z34) and it has solved the spring popping noise every time.
One plastic **** ring and one metal **** ring for the top and bottom of the spring.

Sent from my SM-G955U using Tapatalk
__________________
'14 MB Nismo | Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs.
Betty Mods
BettyZ is offline   Reply With Quote
Old 09-30-2019, 09:03 PM   #10 (permalink)
A True Z Fanatic
 
Join Date: Apr 2011
Location: Sacramento
Posts: 3,157
Drives: 15 370Z Nismo 6MT
Rep Power: 203225
OptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond repute
Default

Quote:
Originally Posted by hrtbrknprince View Post
Thank you Option for the advice. I will stick with Fortune auto and get those thrust washers and radial mounts.

I did forget to mention spring rates. 12k/11k sound like a good compromise or would you get something lower or higher?
Hotrod uses 13/10 on his fortunes but he is tracks the car heavily. I have aragostas with 14/10, but they are valves for that

Since your car is street you may back down to 12/8 or something

Or just ask them what their default rates are and go with tho
hrtbrknprince likes this.
__________________
OptionZero Build Thread
OptionZero is online now   Reply With Quote
Old 09-30-2019, 09:31 PM   #11 (permalink)
A True Z Fanatic
 
Join Date: Jun 2014
Location: Ga
Posts: 13,467
Drives: 2013 Nismo 370z
Rep Power: 2684390
Spooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond repute
Default

I run Aragosta's with 12/10 springs. No issues on the street. I feel I need more spring, 14/11's but my shocks would need to be valved for the fronts. I have 50k on these anyway. I will get them rebuilt in the future or change to something else.
hrtbrknprince and BettyZ like this.
Spooler is offline   Reply With Quote
Old 09-30-2019, 11:09 PM   #12 (permalink)
A True Z Fanatic
 
Join Date: Jun 2014
Location: Ga
Posts: 13,467
Drives: 2013 Nismo 370z
Rep Power: 2684390
Spooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond repute
Default

Quote:
Originally Posted by OptionZero View Post
Hotrod uses 13/10 on his fortunes but he is tracks the car heavily. I have aragostas with 14/10, but they are valves for that

Since your car is street you may back down to 12/8 or something

Or just ask them what their default rates are and go with tho
Hotrodz has changed to true type coilovers. He is in the process of redoing his suspension. The rear true type coilovers he has for the rear now are too stiff. He is getting softer springs for the rear.
Spooler is offline   Reply With Quote
Old 10-01-2019, 12:30 AM   #13 (permalink)
A True Z Fanatic
 
Join Date: Apr 2011
Location: Sacramento
Posts: 3,157
Drives: 15 370Z Nismo 6MT
Rep Power: 203225
OptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond reputeOptionZero has a reputation beyond repute
Default

I know, but at the time he ran OEM type, he had 13/10 fortunes, and that was for track use
i figure going just below that would be fine for street
__________________
OptionZero Build Thread
OptionZero is online now   Reply With Quote
Old 10-03-2019, 07:45 PM   #14 (permalink)
Base Member
 
Join Date: Feb 2012
Location: Savannah
Posts: 113
Drives: 14 MBMM6S
Rep Power: 3368
hrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond reputehrtbrknprince has a reputation beyond repute
Default

Well slightly unrelated but I have yet to order my coilovers because I just found out why my wheels did not arrive on time. The truck they were on apparently caught on fire and my wheels burned up..

Currently trying to find out what's going to happen with that. Was really hoping I could go to Z nationals with the new shoes on...

Totally bummed right now
hrtbrknprince is offline   Reply With Quote
Old 10-03-2019, 09:50 PM   #15 (permalink)
Ronin Samurai - Assassin
 
Rusty's Avatar
 
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 34,812
Drives: 2011 Nismo GM 6M
Rep Power: 2684436
Rusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond repute
Unhappy

Quote:
Originally Posted by hrtbrknprince View Post
Well slightly unrelated but I have yet to order my coilovers because I just found out why my wheels did not arrive on time. The truck they were on apparently caught on fire and my wheels burned up..

Currently trying to find out what's going to happen with that. Was really hoping I could go to Z nationals with the new shoes on...

Totally bummed right now
That sucks.
__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html
Rusty is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[FOR SALE] Aragosta Type S Coilovers, Koni Coilovers, Trans Cooler, Hotchkis Sways, Stillen HFC dimsler Parts for sale (Private Classifieds) 37 05-13-2014 10:34 AM
Anyone going to MSR this weekend ltullos Texas 1 12-12-2013 10:30 PM
great info about coilovers vs springs..i may jus save up for coilovers instead res0zsfa Brakes & Suspension 15 09-09-2010 07:05 PM
Possible get together this weekend in HR! PapoZalsa Mid-Atlantic Region 14 03-08-2010 10:56 PM
How was your weekend? AK370Z The Lounge (Off Topic) 10 11-11-2008 12:35 PM


All times are GMT -5. The time now is 02:58 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2