09-09-2019, 10:27 AM
|
#5 (permalink)
|
|
A True Z Fanatic
Join Date: Jun 2014
Location: Ga
Posts: 14,175
Drives: 2013 Nismo 370z
Rep Power: 2684395
|
Quote:
Originally Posted by Brendan
I think spl stuff is a little overkill for a street driven car. I would also avoid spherical bushing on a street driven car as the joints can get damaged prematurely depending on the conditions you drive in. Spherical bushing are prone to rattle and make more noise than most are ok with during street driving conditions.
I would recommend sticking with rubber or urethane bushings as it will keep the nvh closer to stock. As far as what you need, try the spc kits front and rear. The front kit offers tons of clearance for wider wheels and tires which may be why you z front arms dont fit.
Good luck. |
Do you know how many people run SPL on this forum? Almost everybody. Op needs to get the SPL rear camber arms and eccentric lock out kit. for the front he needs to get the SPL FUCA's. There is a reason all of us run the SPL parts. They flat out work.
|
|
|
15Likes
Similar Threads
Threaded Mode
