Big Brake Kits

SeeThruHead

https://www.z1motorsports.com/nfs/ni...t-p-21702.html

Anyone ever run these?

Or would it be better saving more for something like the forthcoming ap racing kit.

__________________
My Build thread STH Build Plan Thread
Images too big fix here

cv129

Rebranded stoptechs. Just get ST’s Trophy kit if you like the brand.

__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield

DarkJak

If you're at this price point, you're close on the AP Racing kit I have available (just over $4000 for the fronts if you piece together the parts, much more info in my thread)

I looked into these prior to making my kit, and had some talks with Nismo to confirm more info and here's what I have:

• What is the piston material?

• Aluminum

• Do the NISMO Calipers have dust boots?

• Yes

• Do these bolt up to stock rotor offsets, or will they need to accompanying Aerorotors?

• Offset difference is around 1mm, should be able to bolt up Calipers with his existing 2pc rotor setup.

From the aluminum pistons and having dust boots, I view them more as street calipers. Plus, have been familiar with the caliper body these use from their ST60/40 kits, which have been around for ages.
If you don't need "Nismo" on them, the AP Racing CP9668 and CP9660 calipers are a big improvement for track use. Much lighter, can fit more pad, and hold up to higher temps.

__________________
@stupidtoycars | My track vids
09 7AT|MCS 2WNR|Topgunz Rotrex|Ecutek (Eugene)|Maxxis RC1|Titan-7 TS-5|OSG LSD|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler|Fismo|G-LOC R12/R10|Zeta III L|NLR Wing and Splitter|CJM Pan and Fuel Hat|Radium Surge Tank|AP Racing CP9668