Loose clutch petal

Originally Posted by Jsolo

What does your petal look like?

Like this?

Pedal stiffness is dictated primarily by the pressure plate fingers. That is after all what you're pressing against to release the clutch. I suppose it's possible for the spring tension to weaken on these fingers and pedal pressure to change. A fail[ing] csc will typically have a fluctuating grab point, or even all the way at the floor and dead pedal for majority of its travel.

Changing clutch fluid is very easy. Just did it a few days ago on mine. You'll need some apparatus to remove the old fluid from the reservoir (but not completely), then either gravity bleed or have a helper pump the pedal slowly then hold while you open and close the bleeder screw at the trans. I did a combination of gravity bleeding to flush new fluid through the system, then a helper for good measure.

Post a pic of your clutch fluid reservoir with the cover removed.

Originally Posted by Billibob22