Caliper Compressor

Rusty · 02-15-2016, 10:24 PM

For replacing pads with the calipers still on the car. I use the old pads and use a small pry bar to push the pistons in. With the calipers off the car. Old pads and a 4" C-clamp. With a 4 piston set-up. 2 C-clamps. One on each side.

osbornsm · 02-16-2016, 12:29 PM

They make the right tool for the right job...

Search for: Brake Caliper Compressor

Can get one pretty cheap, and is better for your brake pistons than cramming an old pad against it.

Rusty · 02-16-2016, 08:14 PM

Quote:

Originally Posted by osbornsm

They make the right tool for the right job...

Search for: Brake Caliper Compressor

Can get one pretty cheap, and is better for your brake pistons than cramming an old pad against it.

You have one?

I was going to get one like that. But then thought that I can change out the pads just as quick using my method. Still might pick one up just to have.

kenchan · 02-17-2016, 03:26 PM

Quote:

Originally Posted by Rusty

You have one?

I was going to get one like that. But then thought that I can change out the pads just as quick using my method. Still might pick one up just to have.

yah, i never bothered to get this tool either. i too just use a clamp and a small prybar... more like a large flat head screw driver size. works fine for me.

02-15-2016, 10:24 PM	#1 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,524 Drives: 2011 Nismo GM 6M Rep Power: 2684439	For replacing pads with the calipers still on the car. I use the old pads and use a small pry bar to push the pistons in. With the calipers off the car. Old pads and a 4" C-clamp. With a 4 piston set-up. 2 C-clamps. One on each side. Zauskycop, gomer_110 and YzGyz like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

02-16-2016, 12:29 PM	#2 (permalink)
osbornsm A True Z Fanatic Join Date: Jun 2011 Location: WHAT Posts: 2,551 Drives: 2018 Camaro SS 1LE Rep Power: 425	They make the right tool for the right job... Search for: Brake Caliper Compressor Can get one pretty cheap, and is better for your brake pistons than cramming an old pad against it. Rusty, TBatt and Kzonts like this. __________________ 2018 Camaro SS 1LE (455hp) - 2011 Nissan 370z (333hp) - 2004 VW R32 (240hp) - 2000 Civic Si (160hp)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
60 gallon compressor	JDMkid	Misc Items for sale (No Z stuff)	12	05-08-2013 12:00 AM
[FOR SALE] AC Compressor	SPOHN	Parts for sale (Private Classifieds)	11	11-21-2012 12:01 PM
A/C compressor..	Chan Chee Hoe	Nissan 370Z General Discussions	5	12-06-2009 12:21 PM