Show me your custom rear hatch floors

Liquid_G

Not sure if this belongs in the interiors section or here, but figured audio is probably the reason people have done custom floors in the hatch area, so here goes..

I'm making some changes back there and need to basically build my own floor. I currently have the wicked cas spare tire enclosure but thats not going to work for me anymore. Spare tire is coming out and will be replaced by other "stuff".

Wanted to see some examples of what people have done.. my thoughts are its going to have to be multipiece because of the angles on the sides, but want it secured well so that it won't be an issue during spirited driving or the off chance i make it back out to the track..

So if you don't mind sharing, post up some pics por favor!

__________________

Chuck33079

Subbed for pics.

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Mitco39

This is Chinooks (Lee's) Hatch,

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

RonRizz

Box is secured with spare tire bracket
Floor is laminated with formica
Sub grille is frosted plexiglass

Attached Images

	370z trunk box.jpg (2.7 KB, 686 views)
	370z trunk near complete.jpg (3.9 KB, 687 views)
	370z trunk.jpg (4.3 KB, 687 views)

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

Liquid_G

Ron so that first pic, I'm assuming your box is separate piece from the floor itself right?

__________________

2011 Nismo#91

I use the Wicked C.A.S. Box

Liquid_G

ya i have that wickedcas box now and can't use it anymore thats why i'm asking for anyone who has done custom stuff.

__________________

xxAGAVExx

A wood box I built that sits on my spare tire.



Sent from my iPhone using Tapatalk

__________________
l 09/6MT l BP Twin Turbo Kit l E-85 w/Fuel Return l FI 18" Res CF CBE l Powertrix Ultra-Lite Coilovers l Wavetrac LSD | Lots of SPL and Carbon Fiber |

RonRizz

Correct. I installed the box and its top plate first, then cut my finished floor piece, which is split down the center... Layed it into place, and drilled through in a few spots for locating dowels, removed both sides of the finish panel, and applied laminate.

The entire assembly can be removed in about 15 minutes with a Phillips screwdriver and a 10mm wrench.

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

Liquid_G

Thanks.. keep em coming.

__________________

ScottOmatic

Don't mean to go too far off topic of your discussion but does the Wicked CAS spare tire enclosure have the option of going completely stealth?

I see on their site they have the option of getting new rear carpet with the cut out for the sub to perforate through but I am wondering if there is an option for it to remain concealed.

Mitco39

I have the factory carpet over it and there is a bit of a bulge in it. If you were to remove the grating on the sub you could probably just sit the carpet over it with no issues. You would have to take care not to drop anything on the sub however.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

reeps

Liquid_G

^ damn thats got to hit hard.

__________________

Cbtech

nothing was put away in this pic...

__________________