Converter to plug into line that runs to Bose Sub?

pfdaxe · 02-08-2013, 07:23 AM

Quote:

Originally Posted by Mitco39

Looking at this plug which comes from the HU to the Amp it appears that one could just tap in a line out converter before the signal hits the amp. I could also tap into the On signal from the HU.

Actually, that plug looks like it's the "output" from the Bose amp. NOT the plug from the HU to the amp. You want to use the input wires on the other plug on the amp (should be connector M84 according the FSM for mine which is an '09).

I'm about to replace my fronts with Polk components (wanted cleaner highs) and will be using the low level Front + & - before the amp. Also, I won't be tapping the wires, rather cut them and solder/heat shrink the connections. I'm hoping that works as right now I have my sub/amp connected to the sub output wires going to the LOC and will need a full signal for the entire system.
.
.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Installing Amp to stock radio using Fierce Audio line converter	VDC_OFF	DIY Section (Do-It-Yourself)	5	07-20-2016 05:41 PM
Help Needed w/ Leaking Brake Line Fittings from SS Line Install	scruffydog	Brakes & Suspension	15	12-08-2012 12:32 PM
Brake Line Plug	scruffydog	Brakes & Suspension	1	11-19-2012 09:11 PM
how to install line driver on factory bose amp?	tl1284494730	Audio & Video	3	09-19-2011 11:41 PM
Stock stereo plug harness (non Bose)	rjgilliam	Wanted	0	11-29-2009 05:18 PM